After clicking on 'Bridge Geometry> Support Lines' in the navigation treeview, follow the steps to define the Support Line. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 |
|  | ||
| 2 |
|  | ||
| 3 |
| |||
| 4 |
| |||
| 5 |
|  | ||
| 6 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||
| 7 | To model all the support lines, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||
Click three-dots icon on Bridge cell and set a bridge alignment as BRG1.
-20221025-123233.png?version=1&modificationDate=1696260099099&cacheVersion=1&api=v2)
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
|---|
Support Lines |
|---|
Bridge Parameters Abut1 BRG1 0.0000 0.0000 0.0000 Pier2 BRG1 160.0000 0.0000 0.0000 Pier3 BRG1 370.0000 0.0000 0.0000 Abut4 BRG1 530.0000 0.0000 0.0000 |
The completed support lines are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.
Click on the arrow button above the Analysis button located in the upper-left corner of the OpenBrIM screen.  Click on the Model button on the screen that opens up. 
|
|---|
To view the entire procedure explained on this page, please watch the recorded Video below.
0 Comments