Follow the next steps to create load rating reports.
| 1 | Go to Load Rating/Steel I Girder Load Rating. |  |
| 2 | Under General column, name 1st column LoadRatReport. | |
| 3 | Set G4 to Girder. | |
| 4 | Enter Station input. |  |
| 5 | Set SIGLRT1 to LRTemplate. | |
| 6 | Select Panel Type as Interior Panel. |   |
| 7 | Select Modular Ratio Comp. Method as EsbyEc. | |
| 8 | Switch to Cover Plates. |  |
| 9 | Enter cover plate input data or keep the default values. | |
| 10 | Switch to Section Losses. |  |
| 11 | Enter section loss input data or keep the default values. |
Load rating report is completed.
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Steel I Girder Load Rating under Load Rating on the tree view. |
| 2 | Copy General, Cover Plates and Section Losses from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Steel I girder Load Rating | ||
|---|---|---|
General LoadRatReport G4 240.0000 SIGLRT1 Interior Panel EsbyEc N/A | Cover Plates LoadRatReport 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 | Section Losses LoadRatReport 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 |
Add Comment