After clicking on 'Properties> Bolt Property' in the navigation treeview, follow the steps to define the Bolt Property. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 |
|  |
| 2 |
|  |
| 3 |
| |
| 4 |
|  |
| 5 |
| |
| 6 |
|   |
| 7 | To model all the bolt property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
Click first cell on Name cell and set name as BoltFla.Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
|---|
Bolt Property | |
|---|---|
Geometric Properties BoltFla 0.875 1.4375 1.0000 0.4688 0.7344 BoltWeb 0.875 1.4375 1.4375 0.4688 0.7344 BoltGusset 1.0000 1.4375 1.4375 0.4688 0.7344 | Mechanical Properties BoltFla A325 YES Standard Hole DrilledFullSize Excluded ClassB BoltWeb A325 YES Standard Hole DrilledFullSize Included ClassB BoltGusset A325 YES Standard Hole DrilledFullSize Excluded ClassB |
To view the entire procedure explained on this page, please watch the recorded Video below.
0 Comments