Follow the below steps to define the reference support lines where the piers will be located.
| 1 | Go to Bridge Geometry > Support Lines |  |
| 2 | Click the three-dots on the first cell of the Bridge and create the support line at Station 0 by setting it to BRG1 | |
| 3 | Repeat the same to create other support lines as Pier2, Pier3, and Abut4 at Stations 160, 30, and 530 respectively. |
Offset values use PGL as the reference point. -20221025-123233.png?version=1&modificationDate=1666701163368&cacheVersion=1&api=v2)
|
|---|
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Support Lines under Bridge Geometry. | |
| 2 | Copy Bridge Parameters from model inputs and paste into OpenBrIM. | |
Completed Support Lines are illustrated below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Support Lines |
|---|
Bridge Parameters Abut1 BRG1 0 0 0 Pier2 BRG1 160 0 0 Pier3 BRG1 370 0 0 Abut4 BRG1 530 0 0 |
0 Comments