Please follow the instructions provided below to define the reference support lines where the piers will be located.
| 1 | Navigate to Bridge Geometry > Support Lines |
|
| 2 | To create the support line at Station 0 ft for the Bridge, Click on the three-dot icon located on the first cell of the Bridge and set it to "Bridge1". | |
| 3 | Follow the same process to create the support lines for the remaining structures at their respective stations. Set the support line for Pier1 at Station 150 ft, Pier2 at Station 300 ft, and Abut2 at Station 450 ft. |
|
| 4 | Define the skew angle of the support line as in the figure |
 |
To access additional details on each parameter, please refer to the following page.
Follow the below steps to copy and paste all inputs from our data set.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Support Lines |
|---|
Bridge Parameters |
0 Comments