Please follow the instructions provided below to add the insertion points where the bearings will be created.
Navigate to Bridge Geometry > Insertion Point |  |
Click the three-dots on the first cell of the Location and create the first insertion point by setting its location to Abut1 | |
Each bearing must have a minimum of one insertion point. Additionally, for each precast girder, there should be one insertion point at the beginning and one at the end.
|   |
Repeat the same to create other insertion points and set their transverse offset values |  |
Skew angle and transverse offset parameters for support lines that have skew > 0. User need to enter T value for skewed supports. 
Skew angle and longitudinal offset parameters for support lines that have skew > 0.
| |
Offset values use PGL as the reference point.  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Insertion Point under Bridge Geometry. |
| 2 | Copy Bridge Parameters from model inputs and paste into OpenBrIM. |
Insertion point layout is given below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Insertion Point |
|---|
Bridge Parameters |
IP1 Abut1 1.0000 -11.0000 IP2 Abut1 1.0000 -3.5000 IP3 Abut1 1.0000 4.5000 IP4 Abut1 1.0000 12.0000 IP5 Abut1 1.0000 20.0000 IP6 Pier1 -1.0000 -11.0000 IP7 Pier1 -1.0000 -3.5000 IP8 Pier1 -1.0000 4.5000 IP9 Pier1 -1.0000 12.0000 IP10 Pier1 -1.0000 20.0000 IP11 Pier1 1.0000 -11.0000 IP12 Pier1 1.0000 -6.0000 IP13 Pier1 1.0000 -1.0000 IP14 Pier1 1.0000 4.5000 IP15 Pier1 1.0000 10.0000 IP16 Pier1 1.0000 15.0000 IP17 Pier1 1.0000 20.0000 IP18 Pier2 -1.0000 -11.0000 IP19 Pier2 -1.0000 -6.0000 IP20 Pier2 -1.0000 -1.0000 IP21 Pier2 -1.0000 4.5000 IP22 Pier2 -1.0000 10.0000 IP23 Pier2 -1.0000 15.0000 IP24 Pier2 -1.0000 20.0000 IP25 Pier2 1.0000 -11.0000 IP26 Pier2 1.0000 -3.5000 IP27 Pier2 1.0000 4.5000 IP28 Pier2 1.0000 12.0000 IP29 Pier2 1.0000 20.0000 IP30 Abut2 -1.0000 -11.0000 IP31 Abut2 -1.0000 -3.0000 IP32 Abut2 -1.0000 5.0000 IP33 Abut2 -1.0000 12.5000 IP34 Abut2 -1.0000 20.0000 |
0 Comments