Please follow the instructions provided below to add Surface Load
Navigate to Loads > Surface Load |  |
Click on the three-dots icon in the surface cell, and set Span1DeckSurface to identify the construction stages that have a surface load. | |
Define surface loads for each span in the project. Then enter the names. |  |
Click three-dots icon on Stage cell and click select. Enter the stage data as follows:
|   |
Enter the magnitudes of the (Surface) Loads to be applied on Surface as in the figure. |  |
In this cell, set the Element's object, which indicates which surface load will be applied to each surface. |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Surface Load under Loads on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Surface Load |
|---|
General |
SIPLoad_Sp1 Span1DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck SIPLoad_Sp2 Span2DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck SIPLoad_Sp3 Span3DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck |
0 Comments