Please follow the instructions provided below to create girder line layouts.
Navigate to Bridge Geometry > Girder Layout |   |
Click three-dots on the first cell of the Supports and pick the insertion points IP1, IP6 | |
Follow the same process to set all Girder Layouts | |
Enter the Initial & End Cantilever Length of Girder and values as 6.5 |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigat to Girder Layout under Bridge Geometry. | |
| 2 | Copy Layout from model inputs and paste into OpenBrIM. | |
Girder layout is given below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Girder Layout |
|---|
Layout |
GL1 [IP1,IP6] 6.5 6.5 GL2 [IP2,IP7] 6.5 6.5 GL3 [IP3,IP8] 6.5 6.5 GL4 [IP4,IP9] 6.5 6.5 GL5 [IP5,IP10] 6.5 6.5 GL6 [IP11,IP18] 6.5 6.5 GL7 [IP12,IP19] 6.5 6.5 GL8 [IP13,IP20] 6.5 6.5 GL9 [IP14,IP21] 6.5 6.5 GL10 [IP15,IP22] 6.5 6.5 GL11 [IP16,IP23] 6.5 6.5 GL12 [IP17,IP24] 6.5 6.5 GL13 [IP25,IP30] 6.5 6.5 GL14 [IP26,IP31] 6.5 6.5 GL15 [IP27,IP32] 6.5 6.5 GL16 [IP28,IP33] 6.5 6.5 GL17 [IP29,IP34] 6.5 6.5 |
0 Comments