Please follow the instructions provided below to create Girder Camber Diagram and Fabrication Model
| 1 | Camber diagram is used in construction, which indicates the specified camber at all points along the length of a truss or beam. When constructing a structure, such as a bridge, fabrication models should be created that take into account displacements made along a line and their corresponding opposite shifts. This section will cover to create the Camber Diagram and Fabrication Model Report by making the required assignments. | |
| 2 | Navigate to Reports > Girder Camber Diagram and Fabrication Model |  |
| 3 | Set Girder under Girder Column to create Camber Diagram and Fabrication report. Set Girder as G1. | |
| 4 | Navigate Deflection Results Cases tab. |   |
| 5 | Click three-dots icon on Steel Dead Load and click select. Select TubGirderDL in the combobox. | |
| 6 | Repeat the same steps from 4 to 5 for Non-Composite Dead Load and Composite Dead Load. Enter data as follows:
|  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Girder Camber Diagram and Fabrication Model under Reports on the tree view. |
| 2 | Copy General and Deflection Result Cases from model inputs and paste into OpenBrIM. |
The Girder Camber Diagram and Fabrication Model have been created.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Girder Camber Diagram and Fabrication Model | |
|---|---|
General | Deflection Result Cases |
STGC1 G1 | STGC1 TubGirderDL DeckDL DC2 Ten Segment per Span NO |
Add Comment