This part is to inform about the general purposes of section definitions.
Please follow the instructions provided below to set section definitions to be used in this bridge example.
| 1 | Navigate to Properties > Sections |  |
| 2 | To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
| 3 | Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle |   |
| 4 | Enter Width as 60 and Depth as 84 in import section editor. | |
| 5 | Click Import | |
| 6 | Rename this section as HammerHeadSec | |
| 7 | Assign Material as Fc_4ksi (If the material Fc_4ksi is already assigned by default, there is no need to assign it again) | |
| 8 | Repeat the same steps from 2 to 7 for the second rectangular section Enter Width and Depth
Rename this section as HalfHammerHeadSec1 Assign Material as Fc_4ksi |  |
| 9 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as HalfHammerHeadSec2 Assign Material as: Fc_4ksi |  |
| 10 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P2 Assign Material as: Fc_5ksi |  |
| 11 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P3 Assign Material as: Fc_5ksi |  |
| 12 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as PileSec Assign Material as: Fc_5ksi |  |
| 13 | Import another section by selecting
Assign Material as: A709_50W |  |
| 14 | Import another section by selecting OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8 Assign Material as: A709_50W |  |
| 15 | Create a new section by defining its name as RigidSection |  |
| 16 | Copy and paste the data below. RigidSection RigidMaterial 6400.0000 6400.0000 6400.0000 3413333.3333 3413333.3333 3413333.3333 0.0000 YES NO NO |
Completed Sections definitions are illustrated below.
Properties >
Please follow the instructions provided below to set rebar detailing for HammerHeadSec.
| 1 | From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel. |  |
| 2 | Click + icon at the left top side of the screen. And Select Rebar |  |
| 3 | Enter:
Click Add. |  |
| 4 | Click again + icon at the left top side of the screen. |    |
| 5 | The reinforcement identification process will be carried out three times on the bottom reference edge. Select Rebar
Click Add. | |
| 6 | Repeat the same step for
values. | |
| 7 | Click again + icon at the left top side of the screen. |  |
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 6.0000 -24.3650 -24.0000 -24.3650 24.0000 |  |
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |  |
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 6.0000 24.3650 -24.0000 24.3650 24.0000 |  |
| 14 | Paste copied data. |
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.
| 1 | From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel. |  |
| 2 | Click + icon at the left top side of the screen. And Select Rebar |  |
| 3 | The reinforcement identification process will be carried out three times on the top reference edge. Enter:
Click Add. |    |
| 4 | Repeat the same step for
values. | |
| 5 | Click again + icon at the left top side of the screen. |  |
| 6 | Select Rebar
Click Add. | |
| 7 | Click again + icon at the left top side of the screen. |  |
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 -6.0000 -28.3650 -6.0000 -28.3650 6.0000 |  |
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |  |
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 -6.0000 28.3650 -6.0000 28.3650 6.0000 |  |
| 14 | Paste copied data. |
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.
| 1 | From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel. |  |
| 2 | Click + icon at the left top side of the screen. And Select Rebar |  |
| 3 | The reinforcement identification process will be carried out three times on the top reference edge. Enter:
Click Add. |    |
| 4 | Repeat the same step for
values. | |
| 5 | Click again + icon at the left top side of the screen. |  |
| 6 | Select Rebar
Click Add. | |
| 7 | Click again + icon at the left top side of the screen. |  |
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 -6.0000 -28.3650 -42.0000 -28.3650 42.0000 |  |
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |  |
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 -6.0000 28.3650 -42.0000 28.3650 42.0000 |  |
| 14 | Paste copied data. |
Please follow the instructions provided below to set rebar detailing for ColSec_P2
| 1 | From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel. |  |
| 2 | Click + icon at the left top side of the screen. And Select Rebar |  |
| 3 | Enter:
Click Add. |  |
| 4 | Click again + icon at the left top side of the screen. |  |
| 5 | Select Rebar
Click Add. | |
| 6 | Click again + icon at the left top side of the screen. |  |
| 7 | Select Rebar
Click Add. | |
| 8 | Click again + icon at the left top side of the screen. |  |
| 9 | Select Rebar
Click Add. |
Please follow the instructions provided below to set rebar detailing for ColSec_P3
| 1 | From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel. |  |
| 2 | Click + icon at the left top side of the screen. And Select Rebar |  |
| 3 | Enter:
Click Add. |  |
| 4 | Click again + icon at the left top side of the screen. |  |
| 5 | Select Rebar
Click Add. | |
| 6 | Click again + icon at the left top side of the screen. |  |
| 7 | Select Rebar
Click Add. | |
| 8 | Click again + icon at the left top side of the screen. |  |
| 9 | Select Rebar
Click Add. |
0 Comments