The following parameters will be utilized in the splice component and splice design.
Geometric Properties
Bolt diameter [in][0.625/0.75/0.875/1/1.1225]: The design only supports the given options for bolt diameter, and entering a different bolt diameter is not supported.
Diameter of head [in]:
Diameter of the nut [in]:
Thickness of the head [in]:
Thickness of the nut [in]:
Mechanical Properties
ASTM Standard of Bolts[LowStrengthBolt/ASTM_F3125]:
Grade of bolt material[A325/F1852/A490/F2280/A307_GradeA]:
Is Bolt Slip Critical[Yes/No]:
Hole type[StandardHole / OversizeAndShortSlottedHole / Long Slotted Holes with Perpendicular To Force /Long Slotted Holes With Parallel To Force]:
Bolt Thread[Excluded/Included]:
Surface Condition[ClassA/ClassB/ClassC/ClassD]:
0 Comments