Follow the below steps to perform Circular Column Design.
Table 1: C 28 Circular Column Design
| 1 | Go to C28 Circular column under Column Design Line from tree view. Click “Column Design Line Data” and select “Axial Force Moment Design”. Enter the data as shown on the screen. "Reinforcement Ratio %" values have changed as a result of the entered values |  |
| 2 | Column C28 must be verified again due to the entered values. Click “Verify select” button and select C28 column on CAD side. If the Design State cell is "Passed" for all stories, the design is complete. |  |
| 3 | Also, click on the Detailed Report "show" button, a code check report will be opened for column C28. | |
| 4 |  Circular Column Code Check Report for C28 Column - Roof | |
Table 1: C 29 Circular Column Design
| 1 | When you enter rebar count for circular column , BDS automatically determines the placement of the longitudinal rebar.
| |
| 2 | Go to C29 Circular column under Column Design Line from tree view. Click “Column Design Line Data” and select “Rebar Templates” Click “Draw Rebars” button and enter “2” inch. Draw rebars as in CAD view as in | |
| 3 |
0 Comments