Follow the below steps to define the reference support lines where the piers will be located.
| 1 | Go to Support Line on tree view next to the data spreadsheet. |  |
| 2 | Select Bridge and enter the support stations. | |
| 3 | Follow the steps below to match the same inputs as illustrated model. | |
| 4 | Go to Support Lines under Bridge Geometry. | |
| 5 | Copy Bridge Parameters from model inputs and paste into OpenBrIM. | |
Completed Support Lines is illustrated below
Copy the desired data with the automatic copy button in the upper left corner.
Click on the first cell in and use the Ctrl+V shortcut to paste.
Support Lines |
|---|
Bridge Parameters Abut1 BRG1 0 0 0 Pier2 BRG1 160 0 0 Pier3 BRG1 370 0 0 Abut4 BRG1 530 0 0 |
0 Comments