Follow the next steps to add the pier columns
| 1 | Go to Pier Column on the tree view |  |
| 2 | Click three-dots icon on the Pier Cap cell and select a pier cap | |
| 3 | Click three-dots icon on the Section Data and click edit |  |
| 4 | Follow section import instructions that given previously. |  |
| 5 | The column has the same section from top to bottom, so there is no need to define a section variation along the column length. | |
| 6 | Enter Section Length starting from top | |
| 7 | Select Start & End Sections | |
| 8 | Go to FEM tab and set Rigid Section |   |
Completed pier columns is illustrated below
Add Comment