Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 6 Next »

Figure 1

Click Mat Edge button as shown in Figure 1 to draw foundation mat as illustrated in Figure 2.

Figure 2

Enter the properties of the mat edge such as offset, thickness, soil capacity or soil subgrade modulus. Select the concrete and rebar material.

Figure 3

To divide mat edge into pieces which have different properties click Mat Piece button as shown in Figure 1 and draw piece area as demonstrated in Figure 4

Figure 4

Enter the properties of the mat piece such as offset, thickness, soil capacity or soil subgrade modulus. Select the concrete and rebar material.

Figure 5

  • No labels