Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 5 Next »

Follow the next steps to analyze and design.

1

(blue star) Click Analyze icon.

If you have made changes to the model after the analysis and want to use the old analysis results, you can refer to the Quick Tip below.

2

 Quick Tip: Learn how to use previous analysis results

If you have made changes to an analyzed model and click the button to perform the analysis again, the question shown below will be asked. You can either continue with the saved old analysis results or click the analysis button again to update the analysis results.

3

(blue star) Click Design icon.

If you have made changes to the model after the design and want to use the old design results, you can refer to the Quick Tip below.

4

 Quick Tip: Learn how to use previous design results

If you have made changes to an designed model and click the button to perform the design again, the question shown below will be asked. You can either continue with the saved old design results or click the design button again to update the design results.

5

Design code check calculations are in progress.

6

(blue star) Click Report icon.

7

(blue star) Click Detailed Report button.

8

(blue star) Switch between the Summary Report tree view and review the results.

  • No labels