Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 20 Next »

After clicking on 'Superstructure> Stiffeners> Transverse Stiffener' in the navigation treeview, follow the steps to define the Transverse Stiffener. You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Transverse Stiffener
Transverse Stiffener [SIG]

(blue star) Click the three-dots icon on the Girder cell, and then set G4.

(blue star) Enter the Station as 130.2414.

(blue star) Keep the Side of Web as default.

(blue star) Click three-dots icon on Material cells and select a Material as A709 50W.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

 Quick Tip: Learn how to import materials

If there is no material to be set, follow the steps below:

- Click the three dots on the cell and select Import Material.

- In the opened window, choose the material.
- Click the Import button.

(blue star) Keep the Dimension, 3D Detailing and FEM as default.

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

To model all the Transverse Stiffener, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

 Quick Tip: Learn how to Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Transverse Stiffener

General

STFT1	G4	130.2414	Both	A709_50W
STFT3	G4	90.2414	Both	A709_50W

 Quick Tip: Learn how to show Model

Click on the arrow button above the Analysis button located in the upper-left corner of the OpenBrIM screen.

Click on the Model button on the screen that opens up.


To view the entire procedure explained on this page, please watch the recorded Video below.

20231004145425.mp4

  • No labels