Follow the next steps to add F shape barriers to both sides of the bridge.
| 1 | Go to F Shape Barrier on the tree view. | -20221008-082635.png?version=1&modificationDate=1665217599232&cacheVersion=1&api=v2) |
| 2 | Click three-dots icon on Deck and select a deck. | |
| 3 | Select the Orientation of the barriers on both sides. | -20221008-082732.png?version=1&modificationDate=1665217656864&cacheVersion=1&api=v2) |
| 4 | Set the concrete Material of the barrier. | -20221008-083000.png?version=1&modificationDate=1665217802792&cacheVersion=1&api=v2) |
| 5 | Enter Start Transverse Offset and End Transverse Offset. | |
| 6 | Go to Dimensions tab. | -20221008-083238.png?version=1&modificationDate=1665217962542&cacheVersion=1&api=v2) |
| 7 | Enter Height and Width. | |
| 8 | Barriers are included in the FE model to distribute the Wind Forces. Also, by assigning a section, you can define a custom shaped barrier. -20221008-083848.png?version=1&modificationDate=1665218338301&cacheVersion=1&api=v2)
| |
Offset values use PGL as the reference point. -20221025-123233.png?version=1&modificationDate=1666701163368&cacheVersion=1&api=v2)
|
|---|
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to F Shape Barrier under Superstructure Attachments on the tree view. |
| 2 | Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM. |
Completed F shape barrier is illustrated below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
F Shape Barrier | |||||
|---|---|---|---|---|---|
F Shape Barrier BR2 Deck1 Left FcCube_4ksi -243 -243 BR3 Deck1 Right FcCube_4ksi 243 243 | Dimensions BR2 35 20 15 10 0 BR3 35 20 15 10 0 | ||||
Add Comment