Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

This part is to inform about the general purposes of section definitions.

Please follow the instructions provided below to set section definitions to be used in this bridge example.

1

Navigate to Properties > Sections

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

4

Enter Width as 54 and Depth as 69 in import section editor.

5

Click Import

6

Rename this section as HammerHeadSec

7

Assign Material as Fc_4ksi

(If the material type came as default, there is no need to assign)

8

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh and Depth

  • Width: 66

  • Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

9

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 66

  • Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

10

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 72

  • Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

11

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 180

  • Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

12

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 24

  • Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

13

Import another section by selecting


OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

14

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

15

Create a new section by defining its name as RigidSection

16

Copy and paste the data below.

RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

Completed Sections definitions are illustrated below.

Properties >

Please follow the instructions provided below to set rebar detailing for HammerHeadSec.

1

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	31.0000
24.0000	31.0000

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	-24.0000
-24.0000	24.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
24.0000	-24.0000
24.0000	24.0000
17

Paste copied data.

Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.

1

From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	23.0000
30.0000	23.0000

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	-23.0000
30.0000	-23.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	-18.0000
-30.0000	18.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
30.0000	-18.0000
30.0000	18.0000
17

Paste copied data.

Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

1

From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	59.0000
30.0000	59.0000

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	-59.0000
30.0000	-59.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-30.0000	-50.0000
-30.0000	50.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
30.0000	-50.0000
30.0000	50.0000

17

Paste copied data.

Please follow the instructions provided below to set rebar detailing for ColSec_P2

1

From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 12

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
33.0000	33.0000
-33.0000	33.0000

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 12

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
33.0000	-33.0000
-33.0000	-33.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-33.0000	27.0000
-33.0000	-27.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
33.0000	27.0000
33.0000	-27.0000
17

Paste copied data.

Please follow the instructions provided below to set rebar detailing for ColSec_P3

1

From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 22

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
87.0000	36.0000
-87.0000	36.0000

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 22

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 8

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-87.0000	28.0000
-87.0000	-28.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 8

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000

17

Paste copied data.

  • No labels