Support Lines

Follow the below steps to define the reference support lines where the piers will be located.

1	Go to Support Line
2	Click the three-dots on the first cell of the Bridge and create the support stations by setting it to BRG1
3	Repeat the same to create 4 support lines

Quick Tip: Transverse Offset Direction Offset values use PGL as the reference point.

Follow the below steps to copy and paste all inputs from our data set.

1	Go to Support Lines under Bridge Geometry.
2	Copy Bridge Parameters from model inputs and paste into OpenBrIM.

Completed Support Lines is illustrated below.

Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Support Lines
Bridge Parameters Abut1 BRG1 0 0 0 Pier2 BRG1 160 0 0 Pier3 BRG1 370 0 0 Abut4 BRG1 530 0 0