Follow the below steps to add the insertion points where the bearings will be created.
| 1 | Go to Insertion Point on tree view next to the data spreadsheet. |  |
| 2 | Select a support line as Location. | |
| 3 | Enter Transverse Offset to relocate the insertion point on the support line. |  |
| 4 | Skew angle and transverse offset parameters for support lines that have skew > 0.  | |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Insertion Point under Bridge Geometry. | |
| 2 | Copy Bridge Parameters from model inputs and paste into OpenBrIM. | |
Insertion point layout is given below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Insertion Point |
|---|
Bridge Parameters IP1 Abut1 0 -16.5 IP2 Abut1 0 -5.5 IP3 Abut1 0 5.5 IP4 Abut1 0 16.5 IP5 Pier2 0 -16.5 IP6 Pier2 0 -5.5 IP7 Pier2 0 5.5 IP8 Pier2 0 16.5 IP9 Pier3 0 -16.5 IP10 Pier3 0 -5.5 IP11 Pier3 0 5.5 IP12 Pier3 0 16.5 IP13 Abut4 0 -16.5 IP14 Abut4 0 -5.5 IP15 Abut4 0 5.5 IP16 Abut4 0 16.5 |
Add Comment