Barriers

Follow the next steps to add F shape barriers to both sides of the bridge.

1	Go to F Shape Barrier under Superstructure Attachments on tree view.
2	Click three-dots icon on Deck and select a deck.
3	Select the Orientation of the barriers on both sides.
4	Set the concrete Material of the barrier.
5	Enter Start Transverse Offset and End Transverse Offset.
6	Go to Dimensions tab.
7	Enter Height and Width.
8	Quick Tip Also, by assigning a section, you can define a custom shaped barrier.
9	Follow the steps below to match the same inputs as illustrated model.
10	Go to F Shape Barrier under Superstructure Attachments on the tree view.
11	Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM.

Completed F shape barrier is illustrated below.

Quick Tip

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

F Shape Barrier

F Shape Barrier

BR2	Deck1	Left	FcCube_4ksi	-243	-243
BR3	Deck1	Right	FcCube_4ksi	243	243

Dimensions

BR2	35	20	15	10	0
BR3	35	20	15	10	0