Versions Compared

Version Old Version 9 New Version Current
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

Navigate to Properties > Sections

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

4

Enter Width as 60 and Depth as 84 in import section editor.

5

Click Import

6

Rename this section as HammerHeadSec

7

Assign Material as Fc_4ksi

(If the material type came as Fc_4ksi is already assigned by default, there is no need to assign it again)

8

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh Width and Depth

  • Width: 66

  • Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

9

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 66

  • Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

10

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 72

  • Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

11

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 204

  • Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

12

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 24

  • Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

13

Import another section by selecting


OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

14

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

15

Create a new section by defining its name as RigidSection

16

Copy and pastethe data below.

Code Block
languagexml
RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

...

Info

Please follow the instructions provided below to set rebar detailing for HammerHeadSec.

Image Removed
1

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No10

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 4

  • Rebar Spacing: 8

  • # of Rebars (per Row): 7

  • # of Rows: 2

  • Row Spacing: 1.27 in

Click Add.

4

Click again + icon at the left top side of the screen.

Image Added

Image Added

Image Added

5

The reinforcement identification process will be carried out three times on the bottom reference edge.

Select Rebar

  • Profile: ASTMA615No10

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 15

  • Rebar Spacing: 8

  • # of Rebars (per Row): 7

  • # of Rows: 2

  • Row Spacing: 1.27 in

Click Add.

6
7

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000
Image Removed

8

Paste copied data.

9

Repeat the same step for

  • Dist. … Outer Surface of Rebar: 9.5

  • Dist. … Outer Surface of Rebar: 4

values.

7

Click again + icon at the left top side of the screen.

Image RemovedImage Added

108

Select Rebar

  • Profile: ASTMA615No8 ASTMA615No10

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0 6

  • # of Rebars (per Row): 6 9

  • # of Rows: 1

Click Add.

119

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	06.0000
-24.00003650	-24.0000
-24.00003650	24.0000
Image RemovedImage Added

1210

Paste copied data.

1311

Click again + icon at the left top side of the screen.

Image RemovedImage Added

1412

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0 6

  • # of Rebars (per Row): 6 9

  • # of Rows: 1

Click Add.

1513

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	06.0000
24.00003650	-24.0000
24.00003650	24.0000
Image RemovedImage Added
1614

Paste copied data.

Info

Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.

Image Removed

Image Removed

1

From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel.

Image RemovedImage Added
2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

    • The reinforcement identification process will be carried out three times on the top reference edge.

    Enter:

    • Profile: ASTMA615No10

    • Material: A615_60

    • Reference Edge: Top

    • Dist. … Outer Surface of Rebar: 2.5 16

    • Rebar Spacing: 0 8

    • # of Rebars (per Row): 10 8

    • # of Rows: 2

    • Row Spacing: 1.27 in

    Click Add.

    		Image Added

    Image Added

    Image Added

    4

    Click … icon shown on top middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-30.0000	23.0000
30.0000	23.0000
    		Image Removed

    Image Removed

    5

    Paste copied data.

    6

    Click again + icon at the left top side of the screen.

    		7

    Repeat the same step for

    • Dist. … Outer Surface of Rebar: 10

    • Dist. … Outer Surface of Rebar: 4

    values.

    5

    Click again + icon at the left top side of the screen.

    Image Added

    6

    Select Rebar

    • Profile: ASTMA615No10

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 8

    • # of Rebars (per Row): 8

    • # of Rows: 2

    • Row Spacing: 1.27 in

    Click Add.

    7

    Click again + icon at the left top side of the screen.

    Image Added

    8

    Select Rebar

    • Profile: ASTMA615No8 ASTMA615No10

    • Material: A615_60

    • Reference Edge: Bottom Left

    • Dist. … Outer Surface of Rebar: 2.5 4

    • Rebar Spacing: 0 6

    • # of Rebars (per Row): 10 3

    • # of Rows: 1

    Click Add.

    89

    Click … icon shown on top left middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0-6.0000
-3028.00003650	-236.0000
30-28.00003650	-236.0000
    		Image RemovedImage Added

    910

    Paste copied data.

    1011

    Click again + icon at the left top side of the screen.

    Image RemovedImage Added

    1112

    Select Rebar

    • Profile: ASTMA615No8 ASTMA615No10

    • Material: A615_60

    • Reference Edge: Left Right

    • Dist. … Outer Surface of Rebar: 2.5 4

    • Rebar Spacing: 0 6

    • # of Rebars (per Row): 6 3

    • # of Rows: 1

    Click Add.

    1213

    Click … icon shown on left right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0-6.0000
-3028.00003650	-186.0000
-3028.00003650	186.0000
    		Image RemovedImage Added

    1314

    Paste copied data.

    Info

    Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

    1

    From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

    		Image Added
    14
    2

    Click

    again Select Rebar

    + icon at the left top side of the screen.

    Image Removed

    15

    And Select Rebar

    		Image Added
    3

    The reinforcement identification process will be carried out three times on the top reference edge.

    Enter:

    • Profile:

    ASTMA615No8

    • ASTMA615No10

    • Material: A615_60

    • Reference Edge:

    Right

    • Top

    • Dist. … Outer Surface of Rebar:

    2.5

    • 16

    • Rebar Spacing:

    0

    • 8

    • # of Rebars (per Row):

    6

    Enter:

    Profile: ASTMA615No8

    • 8

    • # of Rows: 2

    • Row Spacing: 1.27 in

    Click Add.

    1

    From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

    		Image Removed
    2

    Click + icon at the left top side of the screen.

    And Select Rebar

    		Image Removed
    3Image Added

    Image Added

    16

    Click … icon shown on right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
30.0000	-18.0000
30.0000	18.0000
    Image Removed17

    Paste copied data.

    Info

    Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

    Image Added

    4

    Repeat the same step for

    • Dist. … Outer Surface of Rebar: 10

    • Dist. … Outer Surface of Rebar: 4

    values.

    5

    Click again + icon at the left top side of the screen.

    Image Added

    6

    Select Rebar

    • Profile: ASTMA615No10

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 8

    • # of Rebars (per Row): 8

    • # of Rows: 2

    • Row Spacing: 1.27 in

    Click Add.

    7

    Click again + icon at the left top side of the screen.

    Image Added

    8

    Select Rebar

    • Profile: ASTMA615No10

    • Material: A615_60

    • Reference Edge: Top Left

    • Dist. … Outer Surface of Rebar: 2.5 4

    • Rebar Spacing: 0 6

    • # of Rebars (per Row): 10 15

    • # of Rows: 1

    Click Add.

    		Image Removed

    49

    Click … icon shown on top left middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000
    0
    -6.0000
-
    30
    28.
    0000
    3650
    59
    -42.0000
    30
    -28.
    0000
    3650
    59
    42.0000
    		Image RemovedImage Added

    Image Removed

    510

    Paste copied data.

    611

    Click again + icon at the left top side of the screen.

    Image RemovedImage Added

    712

    Select Rebar

    • Profile: ASTMA615No8 ASTMA615No10

    • Material: A615_60

    • Reference Edge: Bottom Right

    • Dist. … Outer Surface of Rebar: 2.5 4

    • Rebar Spacing: 0 6

    • # of Rebars (per Row): 10 15

    • # of Rows: 1

    Click Add.

    813

    Click … icon shown on top right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0-6.0000
-3028.00003650	-5942.0000
3028.00003650	-5942.0000
    		Image RemovedImage Added

    914

    Paste copied data.

    Info

    Please follow the instructions provided below to set rebar detailing for ColSec_P2

    1

    From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel.

    		Image Added

    10
    2

    Click

    again 11Select Rebar

    + icon at the left top side of the screen.

    Image Removed

    And Select Rebar

    		Image Added
    3

    Enter:

    • Profile:

    ASTMA615No8

    • ASTMA615No11

    • Material: A615_60

    • Reference Edge:

    Left

    • Top

    • Dist. … Outer Surface of Rebar:

    2.5

    • 4

    • Rebar Spacing:

    0

    • 6

    • # of Rebars (per Row):

    10

    • 11

    • # of Rows: 1

    Click Add.

    		Image Added

    12
    4

    Click

    … icon shown on left middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-30.0000	-50.0000
-30.0000	50.0000
    Image Removed

    13

    Paste copied data.

    14

    again + icon at the left top side of the screen.

    Image Added

    5

    Select Rebar

    • Profile: ASTMA615No11

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 6

    • # of Rebars (per Row): 11

    • # of Rows: 1

    Click Add.

    6

    Click again + icon at the left top side of the screen.

    Image Removed

    Image Added

    15

    7

    Select Rebar

    • Profile:

    ASTMA615No8

    • ASTMA615No11

    • Material: A615_60

    • Reference Edge:

    Right

    • Left

    • Dist. … Outer Surface of Rebar:

    2.5

    • 4

    • Rebar Spacing:

    0

    • 6

    • # of Rebars (per Row):

    10

    • 9

    • # of Rows: 1

    Click Add.

    16
    8

    Click

    … icon shown on right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
30.0000	-50.0000
30.0000	50.0000
    Image Removed

    17Paste copied data

    again + icon at the left top side of the screen.

    Image Added

    9

    Select Rebar

    • Profile: ASTMA615No11

    • Material: A615_60

    • Reference Edge: Right

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 6

    • # of Rebars (per Row): 9

    • # of Rows: 1

    Click Add.

    Info

    Please follow the instructions provided below to set rebar detailing for ColSec_P2P3

    1

    From any cell of the ColSec_

    P2

    P3 row, click on three-dots icon to open Section Editor panel.

    Image Removed
    Image Added
    2

    Click + icon at the left top side of the screen.

    And Select Rebar

    Image Removed
    Image Added
    3

    Enter:

    • Profile:

    ASTMA615No8

    • ASTMA615No11

    • Material: A615_60

    • Reference Edge: Top

    • Dist. … Outer Surface of Rebar:

    2.5

    • 4

    • Rebar Spacing:

    0

    • 6

    • # of Rebars (per Row):

    12

    • 33

    • # of Rows:

    1Click

    • 2

    • Row Spacing: 1.41 in

    Click Add.

    Image Removed
    Image Added

    4

    Click

    … icon shown on top middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
33.0000	33.0000
-33.0000	33.0000

    Image Removed

    Image Removed

    5

    Paste copied data.

    again + icon at the left top side of the screen.

    Image Added

    5

    Select Rebar

    • Profile: ASTMA615No11

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 6

    • # of Rebars (per Row): 33

    • # of Rows: 2

    • Row Spacing: 1.41 in

    Click Add.

    6

    Click again + icon at the left top side of the screen.

    Image Removed

    Image Added

    7

    Select Rebar

    • Profile:

    ASTMA615No8

    • ASTMA615No11

    • Material: A615_60

    • Reference Edge:

    Bottom

    • Left

    • Dist. … Outer Surface of Rebar:

    2.5

    • 4

    • Rebar Spacing:

    0

    • 6

    • # of Rebars (per Row):

    12

    • 10

    • # of Rows: 2

    • Row Spacing: 1.41 in

    Click Add.

    8

    Click

    … icon shown on top middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
33.0000	-33.0000
-33.0000	-33.0000
    Image Removed

    9

    Paste copied data.

    10

    Click again + icon at the left top side of the screen.

    Image Removed

    11

    Select Rebar

    • Profile: ASTMA615No8

    • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    Image Removed

    Select Rebar

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    • # of Rebars (per Row): 22

    • # of Rows: 1

    Click Add.

    Image Removed

    Image Removed

    again + icon at the left top side of the screen.

    Image Added

    9

    Select Rebar

    1

    From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

    		Image Removed
    2

    Click + icon at the left top side of the screen.

    And Select Rebar

    		Image Removed
    3

    Enter:

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Top

    • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    • # of Rebars (per Row): 22

    • # of Rows: 1

    Click Add.

    		Image Removed

    4

    Click … icon shown on top middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
87.0000	36.0000
-87.0000	36.0000

    		Image Removed

    Image Removed

    5

    Paste copied data.

    6

    Click again + icon at the left top side of the screen.

    		7
    8

    Click … icon shown on top middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000
    		Image Removed

    9

    Paste copied data.

    10

    Click again + icon at the left top side of the screen.

    11

    Select Rebar

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Left

    • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    • # of Rebars (per Row): 8

    • # of Rows: 1

    Click Add.

    12

    Click … icon shown on left middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-87.0000	28.0000
-87.0000	-28.0000
    		Image Removed

    13

    Paste copied data.

    14

    Click again + icon at the left top side of the screen.

    15

    Select Rebar

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Right

    • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    • # of Rebars (per Row): 8

    • # of Rows: 1

    Click Add.

    16

    Click … icon shown on right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
87.0000	28.0000
87.0000	-28.0000
    		Image Removed

    17Paste copied data

    • Profile: ASTMA615No11

    • Material: A615_60

    • Reference Edge: Right

    • Dist. … Outer Surface of Rebar: 4

    • Rebar Spacing: 6

    • # of Rebars (per Row): 10

    • # of Rows:

    1

    Click Add.

    12

    Click … icon shown on left middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-33.0000	27.0000
-33.0000	-27.0000
    Image Removed

    13

    Paste copied data.

    14

    Click again + icon at the left top side of the screen.

    Image Removed

    15

    Select Rebar

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Right

    • Dist. … Outer Surface of Rebar: 2.5

    • Rebar Spacing: 0

    • # of Rebars (per Row): 10

    • # of Rows: 1

    Click Add.

    16

    Click … icon shown on right middle edge of rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
33.0000	27.0000
33.0000	-27.0000
    Image Removed17

    Paste copied data.

    Info

    Please follow the instructions provided below to set rebar detailing for ColSec_P3

    • 2

    • Row Spacing: 1.41 in

    Click Add.