Versions Compared

Version Old Version 9 New Version Current
Changes made by

Orkun Gülel (Unlicensed)

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Follow the below
Panel
panelIconIdatlassian-info
panelIcon:info
:
bgColor#DEEBFF

After clicking on 'Bridge Geometry> Support Lines' in the navigation treeview, follow the steps to define the reference support lines where the piers will be located.

...

Go to Support Line on tree view next to the data spreadsheet.

...

...

Select Bridge and enter the support stations.

...

Go to Support Lines under Bridge Geometry.

...

Copy Bridge Parameters from model inputs and paste into OpenBrIM.

Tip

Completed Support Lines is illustrated below.

...

Support Line. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleSupport Lines
Support Lines [SIG]
1

🖱️ Click three-dots icon on Bridge cell and set a bridge alignment as BRG1.

image-20240724-103914.pngImage Added

2

🖱️ Keep the Station, Skew Angle and Transverse Offset as default.

image-20240724-104003.pngImage Added

3

Insert excerpt
_Quick Tips
_Quick Tips
nameSkewAngleDefinition1
nopaneltrue
Insert excerpt
_Quick Tips
_Quick Tips
nameSkewAngleDefinition2
nopaneltrue

4

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

5

🖱️ Set name as Abut1.

image-20240724-104039.pngImage Added

6

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added
7

To model all the support lines, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Support Lines

Bridge Parameters

Code Block
Abut1	BRG1	0.0000	0.0000	0.0000
Pier2	BRG1	160.0000	0.0000	0.0000
Pier3	BRG1	370.0000	0.0000	0.0000
Abut4	BRG1	530.0000	0.0000	0.0000

Anchor
Photo
Photo

Tip

The completed support lines are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...