...
Area
→ Click Area in Figure 1 to draw area load.
Line
→ Click Line in Figure 1 to draw line load.
Point
→ Click Point in Figure 1 to draw point load.
→ Select load case of for the corresponding load geometry.
...
Figure 2
Load The load drawings, as illustrated shown in Figure 2, are only visible only when the load tab of the floor is active in the tree view. Load geometries are also invisible on 3D view to avoid confusion.In order to prevent confusion, the load geometries are not displayed in the 3D view.
Refresh Load Distribution Factors
→ Click the "Refresh Load Distribution Factors" button, as shown depicted in Figure 1, to see view the percentage of load distribution on vertical members as illustrated . This information is presented in Figure 3.
Check Load Pts
→ Click Check Load Pts :
...