| Info |
|---|
After clicking on ‘Construction> Substructure Construction> Pier Column Construction' in the navigation treeview, follow the steps to define the Pier Column Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Pier Column Construction [SIG] |
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as SubstrConstStage. | 
| ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the pier columns are define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Click three-dots on the cell of the Columns and pick all the columns. | 
| ||||||||||
| 5 | 🖱️ Keep the Self Weight Factor as default. |  | ||||||||||
| 6 | Proceed to the next step to verify the model. | |||||||||||
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed pier column construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |