Content Comparison

...

1

Navigate to Properties > Sections

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

Image Removed

Image Added

4

Enter Width as 54 60 and Depth as 69 84 in import section editor.

5

Click Import

6

Rename this section as HammerHeadSec

7

Assign Material as Fc_4ksi

(If the material type came as Fc_4ksi is already assigned by default, there is no need to assign it again)

8

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh Width and Depth

Width: 66
Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

9

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 66
Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

10

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 72
Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

11

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 180 204
Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

Image Removed

Image Added

12

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 24
Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

13

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

14

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

15

Create a new section by defining its name as RigidSection

Image Removed

Image Added

16

Copy and pastethe data below.

Code Block

language	xml

RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

...

Info
Please follow the instructions provided below to set rebar detailing for HammerHeadSec.

Click … icon shown on top middle edge of rebar.7

1

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

Image Removed

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 8
# of Rebars (per Row): 6 7
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Removed

Image Added

4

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-24.0000	31.0000
24.0000	31.0000

Image Removed

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Removed

Image Added

5

The reinforcement identification process will be carried out three times on the bottom reference edge.

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 2.5 15
Rebar Spacing: 0 8
# of Rebars (per Row): 6 7
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000

Image Removed

9

Paste copied data.

106

Repeat the same step for

Dist. … Outer Surface of Rebar: 9.5
Dist. … Outer Surface of Rebar: 4

values.

7

Click again + icon at the left top side of the screen.

Image RemovedImage Added

118

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0 6
# of Rebars (per Row): 6 9
# of Rows: 1

Click Add.

129

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	06.0000
-24.00003650	-24.0000
-24.00003650	24.0000

Image Removed

Image Added

1310

Paste copied data.

1411

Click again + icon at the left top side of the screen.

Image RemovedImage Added

1512

Select Rebar

Profile: ASTMA615No8
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0 6
# of Rebars (per Row): 6 9
# of Rows: 1

Click Add.

1613

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	06.0000
24.00003650	-24.0000
24.00003650	24.0000

Image Removed

Image Added

1714

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.

1

From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel.

Image Removed

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

3

The reinforcement identification process will be carried out three times on the top reference edge.

Enter:

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar: 16
Rebar Spacing: 8
# of Rebars (per Row): 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Added

4

Repeat the same step for

Dist. … Outer Surface of Rebar: 10
Dist. … Outer Surface of Rebar: 4

values.

5

Click again + icon at the left top side of the screen.

Image Added

6

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 0 8
# of Rebars (per Row): 10 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Removed

4

Click

7

Click again + icon at the left top side of the screen.

Image Added

8

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 3
# of Rows: 1

Click Add.

9

Click … icon shown on top left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0-6.0000
-3028.00003650	23-6.0000
30-28.00003650	236.0000

Image Removed

Image Added

Image Removed

10

5

Paste copied data.

611

Click again + icon at the left top side of the screen.

Image RemovedImage Added

712

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Bottom Right
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 6
# of Rebars (per Row): 10 3
# of Rows: 1

Click Add.

813

Click … icon shown on top right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0-6.0000
-3028.00003650	-236.0000
3028.00003650	-236.0000

Image Removed

Image Added

914

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

1	From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.	Image Added
2	Click + icon at the left top side of the screen. And Select Rebar	Image Added
3	The reinforcement identification process will be carried out three times on the top reference edge. Enter: Profile: ASTMA615No10 Material: A615_60 Reference Edge: Top Dist. … Outer Surface of Rebar: 16 Rebar Spacing: 8 # of Rebars (per Row): 8 # of Rows: 2 Row Spacing: 1.27 in Click Add.	Image Added Image Added Image Added
4	Repeat the same step for Dist. … Outer Surface of Rebar: 10 Dist. … Outer Surface of Rebar: 4 values.	Image Added Image Added Image Added
5	Click again + icon at the left top side of the screen.

Image Removed

Image Added

11

6

Select Rebar

Profile:

ASTMA615No8

ASTMA615No10
Material: A615_60
Reference Edge:

Left

Bottom
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 8
# of Rebars (per Row): 8
# of Rows: 2

.5

Row Spacing: 1.27 in

Click Add.

7

Click again + icon at the left top side of the screen.

Image Added

8

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 4
Rebar Spacing:

0

6
# of Rebars (per Row):

6

15
# of Rows: 1

Click Add.

12

9

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000

0

-6.0000
-

30

28.

0000

3650	-

18

42.0000
-

30

28.

0000

18

42.0000

Image Removed

Image Added

13

10	Paste copied data.

14

11	Click again + icon at the left top side of the screen.

Image Removed

Image Added

15

12

Select Rebar

Profile:

ASTMA615No8

ASTMA615No10
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row):

6

15
# of Rows: 1

Click Add.

16

13

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000

0

-6.0000

30

28.

0000

3650	-

18

42.0000

30

28.

0000

18

42.0000

Image Removed

Image Added

17

14	Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.ColSec_P2

1	From any cell of the

HalfHammerHeadSec2

ColSec_P2 row, click on three-dots icon to open Section Editor panel.

Image Removed

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed

Image Added

3

Enter:

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row):

10

11
# of Rows: 1

Click Add.

Image Removed

Image Added
4	Click

… icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	59.0000
30.0000	59.0000

Image Removed

5Paste copied data

again + icon at the left top side of the screen.

Image Added

5

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 11
# of Rows: 1

Click Add.

6

Click again + icon at the left top side of the screen.

Image Removed

Image Added

7

Select Rebar

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge:

Bottom

Left
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row):

10

9
# of Rows: 1

Click Add.

8

Click

… icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	-59.0000
30.0000	-59.0000

Image Removed

9

Paste copied data.

10Click again

again + icon at the left top side of the screen.

Image Added

9

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 9
# of Rows: 1

Click Add.

Info
Please follow the instructions provided below to set rebar detailing for ColSec_P3

1

From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed

Image Added

11

3

Select Rebar

Enter:

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge:

Left

Top
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row):

10

33
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

Image Added

12

4

Click

… icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	-50.0000
-30.0000	50.0000

Image Removed

13

Paste copied data.

14

again + icon at the left top side of the screen.

Image Added

5

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 33
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

6

Click again + icon at the left top side of the screen.

Image Removed

Image Added

15

7

Select Rebar

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge:

Right

Left
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row): 10
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

16

8

Click

… icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
30.0000	-50.0000
30.0000	50.0000

Image Removed

17

Paste copied data.

...

again + icon at the left top side of the screen.

Image Added

9

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 10
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

Version	Old Version 6	New Version Current
Changes made by	mert.goktas	mert.goktas
Saved on	Feb 17, 2023	Mar 26, 2023

Versions Compared

Key