...
Figure 1
Click Mat Edge button as shown in Figure 1 to draw foundation mat as illustrated in Figure 2Mat foundation is defined and drawn from this section.
...
→ Click the “Mat Edge” button (Figure 1) to draw the mat foundation (Figure 2).
...
Figure 2
→ Enter the properties of the mat edge, such as offset, thickness, soil capacity, or soil subgrade modulus.
→ Select the concrete and rebar material.
...
To divide mat edge into pieces which have with different properties click Mat Piece button as shown in ;
→ Click the “Mat Piece” button (Figure 1) and draw the piece area as demonstrated in (Figure 4).
...
Figure 4
→ Enter the properties of the mat piece, such as offset, thickness, soil capacity, or soil subgrade modulus.
→ Select the concrete and rebar material.
...