Material, projede kullanılacak olan materiyallerin import edileceği sayfadır. Aynı zamanda import edilebilecek material değerlerine ek olarak kullanıcının kendisi de material değerleri ekleyebilir.
...
Şekil-1
Şekil-1’de görülen Material DB butonu hazır olan material’leri yüklemek için olan bir butondur.
Bu butona tıklandığında açılan ekran ile;
...
Şekil-2
Şekil-2’de görüldüğü gibi material’ler görülür. İstenilen material’ler seçilir ve import butonuna basılır.
Add butonuna tıklandığında ;
...
Şekil-3
Şekil-3’te görüldüğü gibi default olarak gelen değerler, kullanıcı tarafından istenilen değerler ile güncellenirMaterials are defined in the Materials section. Materials can be defined either by importing them from the AEC|BOLT BIM Cloud Library database or by providing user input.
...
To import material definitions from the database, follow these steps:
→ Click on "Material DB" (refer to Figure 1).
→ From the list shown in Figure 2, select the required materials.
→ Click the "Import" button.
Figure 2
...
Figure 3
To define a custom material, follow these steps:
→ Click on the "Add" button displayed in Figure 1.
→ Enter the values of parameters such as modulus of elasticity, unit weight, etc., as shown in Figure 3.