Versions Compared

Version Old Version 43 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

image-20241004-145940.pngImage Removed
1

🖱️ Click the three-dots icon on the Substructure cell, and then select Footing1.

image-20250117-150254.pngImage Removedimage-20250117-150906.pngImage Addedimage-20250117-150921.pngImage Addedimage-20250117-150937.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Section and Pile Properites are set in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click three-dots icon on the Pile Length/Section cell and click Edit.

image-20241004-143956.pngImage Removed

image-20250117-150959.pngImage Added

5

🖱️Enter the Section Length as 50.

image-20241004-144417.png
6

🖱️ Click three-dots icon on Start Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20241004-144446.pngimage-20241004-144523.pngimage-20241004-144540.png
7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

8

🖱️ Click three-dots icon on End Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20241004-144618.png
9

Insert excerpt
_Quick Tips
_Quick Tips
nameImportSection
nopaneltrue

10

🖱️Enter the Longitudinal Offset as 5.

image-20241004-144639.pngImage Removed

image-20250117-151114.pngImage Added

11

Insert excerpt
_Quick Tips
_Quick Tips
nameLongitudinalOffsetDefinition
nopaneltrue

12

🖱️Enter the Transverse Offset as 10.

image-20241004-144810.pngImage Removed

image-20250117-151130.pngImage Added

13

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

14

🖱️Enter the Section Orientation as 30.

image-20241004-144842.pngImage Removed

image-20250117-151146.pngImage Added

15

🖱️ Keep the Batter Angle(Long.), Batter Angle(Trans.) and Embed. Length into Substructure as default.

image-20241004-145047.pngImage Removed

image-20250117-151210.pngImage Added

16

image-20241004-145156.png Enter the Pile Capacity as 720.

image-20241004-145245.pngImage Removed

image-20250117-151224.pngImage Added

17

Pile’s FEA propetries can be defined using FEA tab.

image-20241004-145450.png Keep Soil Spring Type as default.

image-20241004-145508.png

18

image-20241004-145544.png Click three-dots icon on Soil Springs (Linear) cell and select ‘Edit..’.

image-20241004-145651.png

19

🖱️Enter the Offset from the bottom of the Footing/Bent as 3.

🖱️ Keep the Tx,Ty,Tz, Rx, Ry and Rz as default.

image-20241004-145847.png

20

🖱️ To model all the pile property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet.

image-20240928-073133.pngImage Removedimage-20250117-151310.pngImage Added

21

🖱️ Keep the Top Connection and Generate FEM and parameters of FEA-Group Effect tab’s parameters as default.

22

🖱️ Set name as Pile2.

Image Removed

image-20250117-151348.pngImage Added

23

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

24

To model all the pile, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...