...
Şekil-1
Mat Edge butonuna basıldığında kullanıcıdan bir çizim yapması beklenmektedir. Kullanıcı doğru koordinatlar üzerinde çizim yaparak temel matını oluşturabilmektedir.
...
Şekil-2
Kullanıcı Mat Edge’i çizdikten sonra Şekil-2’de görülen ekranda Mat Edge’e ait değerleri update edebilir.
Şekil-1’de görülen Mat Piece butonuna basıldığında daha önceden çizilmiş mat edge sınırları içinde çizim yapılarak mat edge parçalara ayrılabilir.
...
Şekil-3
Mat Piece kullanıcı tarafından çizildikten sonra Şekil-3’te görülen default değerleri güncellenebilir.Mat foundation is defined and drawn from this section.
...
→ Click the “Mat Edge” button (Figure 1) to draw the mat foundation (Figure 2).
...
Figure 2
→ Enter the properties of the mat edge, such as offset, thickness, soil capacity, or soil subgrade modulus.
→ Select the concrete and rebar material.
...
Figure 3
To divide mat edge into pieces with different properties;
→ Click the “Mat Piece” button (Figure 1) and draw the piece area (Figure 4).
...
Figure 4
→ Enter the properties of the mat piece, such as offset, thickness, soil capacity, or soil subgrade modulus.
→ Select the concrete and rebar material.
...
Figure 5