Versions Compared

Version Old Version 39 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

After clicking on 'Substructure> Pile' in the navigation treeview, follow the steps to define the Pile. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleSingle Pile
Single Pile [SIG]

1

🖱️ Click the three-dots icon on the Substructure cell, and then select Footing1.

image-20241004-143838.pngImage RemovedImage Removedimage-20241004-143910.pngImage Removed

image-20250117-150906.pngImage Addedimage-20250117-150921.pngImage Addedimage-20250117-150937.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Section and Pile Properites are set in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click three-dots icon on the Pile Length/Section cell and click Edit.

image-20241004-143956.pngImage Removed

image-20250117-150959.pngImage Added

5

🖱️Enter the Section Length as 50.

image-20241004-144417.png
6

🖱️ Click three-dots icon on Start Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20241004-144446.pngimage-20241004-144523.pngimage-20241004-144540.png
7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

8

🖱️ Click three-dots icon on End Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20241004-144618.png
9

Insert excerpt
_Quick Tips
_Quick Tips
nameImportSection
nopaneltrue

10

🖱️Enter the Longitudinal Offset as 5.

image-20241004-144639.pngImage Removed

image-20250117-151114.pngImage Added

11

Insert excerpt
_Quick Tips
_Quick Tips
nameLongitudinalOffsetDefinition
nopaneltrue

12

🖱️Enter the Transverse Offset as 10.

image-20241004-144810.pngImage Removed

image-20250117-151130.pngImage Added

13

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

14

🖱️Enter the Section Orientation as 30.

image-20241004-144842.pngImage Removed

image-20250117-151146.pngImage Added

15

🖱️ Keep the Batter Angle(Long.), Batter Angle(Trans.) and Embed. Length into Substructure as default.

image-20241004-145047.pngImage Removed

image-20250117-151210.pngImage Added

16

image-20241004-145156.png Enter the Pile Capacity as 720.

image-20241004-145245.pngImage Removed

image-20250117-151224.pngImage Added

17

Pile’s FEA propetries can be defined using FEA tab.

image-20241004-145450.png Keep Soil Spring Type as default.

image-20241004-145508.png

18

image-20241004-145544.png Click three-dots icon on Soil Springs (Linear) cell and select ‘Edit..’.

image-20241004-145651.png

19

🖱️Enter the Offset from the bottom of the Footing/Bent as 3.

🖱️ Keep the Tx,Ty,Tz, Rx, Ry and Rz as default.

image-20241004-145847.png

20

🖱️ To model all the pile property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet.

image-20240928-073133.pngImage Removedimage-20250117-151310.pngImage Added

21

🖱️ Keep the Top Connection and Generate FEM and parameters of FEA-Group Effect tab’s parameters as default.

image-20241004-145940.pngImage Removed
22

🖱️ Set name as Pile2.

Image Removed

image-20250117-151348.pngImage Added

23

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

24

To model all the pile, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

FEA Tab-Soil Springs (Linear)-Pile Property

Pile Property

Code Block
3.0000	Free	Free	Free	Free	Free	Free
6.0000	Free	Free	Free	Free	Free	Free
9.0000	Free	Free	Free	Free	Free	Free
12.0000	Free	Free	Free	Free	Free	Free
15.0000	Free	Free	Free	Free	Free	Free
18.0000	Free	Free	Free	Free	Free	Free
21.0000	Free	Free	Free	Free	Free	Free
24.0000	Free	Free	Free	Free	Free	Free
27.0000	Free	Free	Free	Free	Free	Free
30.0000	Free	Free	Free	Free	Free	Free
33.0000	Free	Free	Free	Free	Free	Free
36.0000	Free	Free	Free	Free	Free	Free
39.0000	Free	Free	Free	Free	Free	Free
42.0000	Free	Free	Free	Free	Free	Free
45.0000	Free	Free	Free	Free	Free	Free
48.0000	Free	Free	Free	Free	Free	Free
50.0000	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed

General Tab-Pile

Pile

Code Block
Pile2	Footing1	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile3	Footing1	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile4	Footing1	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile7	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile8	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile9	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile11	Footing1	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile12	Footing1	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile13	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile14	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile16	Footing2	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile17	Footing2	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile18	Footing2	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile21	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile22	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile23	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile25	Footing2	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile26	Footing2	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile27	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile28	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	3.0000	720.0000

FEA Tab-Pile

Pile

Code Block
Pile2	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile3	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile4	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile7	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile8	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile9	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile11	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile12	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile13	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile14	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile16	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile17	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile18	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile21	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile22	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile23	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile25	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile26	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile27	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES
Pile28	Linear Spring	[[36, 0, 0, 0, 0, 0, 0],[72, 0, 0, 0, 0, 0, 0],[108, 0, 0, 0, 0, 0, 0],[144, 0, 0, 0, 0, 0, 0],[180, 0, 0, 0, 0, 0, 0],[216, 0, 0, 0, 0, 0, 0],[252, 0, 0, 0, 0, 0, 0],[288, 0, 0, 0, 0, 0, 0],[324, 0, 0, 0, 0, 0, 0],[360, 0, 0, 0, 0, 0, 0],[396, 0, 0, 0, 0, 0, 0],[432, 0, 0, 0, 0, 0, 0],[468, 0, 0, 0, 0, 0, 0],[504, 0, 0, 0, 0, 0, 0],[540, 0, 0, 0, 0, 0, 0],[576, -1, -1, -1, -1, -1, -1]]	N/A	N/A	N/A	Fixed	YES

...

Anchor
Photo
Photo

Tip

The completed piles are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

...