Content Comparison

...

Panel

panelIconId	atlassian-info
panelIcon	:info:
bgColor	#DEEBFF

Follow the below steps to add piles.

...

Go to Pile under Substructure on the tree view.

...

Click three-dots icon on Substructure and select or pick footing.

...

Go to Section Data column. Click three-dots icon to open Edit spreadsheet.

...

You can import or select pile section.

...

Enter the Longitudinal Offset, Transverse Offset, Section Orientation, Ground Elevation, Batter angle and Pile Embedment input parameters.

...

Switch to FEA tab. Click three-dots icon on Pile Properties and edit.

...

Enter Offset from the bottom of the footing.

...

Edit Tx/Ty/Tz/Rx/Ry/Rz properties.

...

Go back and enter Pile Capacity/Top Connection/Generate FEM.

...

Tip
Completed bridge model is illustrated below.

Image Removed

...

Go to Pile under Substructure on the tree view.

...

Copy Pile from model inputs and paste into OpenBrIM.

...

Go to FEA under Pile on the tree view.

...

Piles

...

Pile

Code Block

Pile2	Footing1	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile3	Footing1	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile4	Footing1	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile7	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile8	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile9	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile11	Footing1	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile12	Footing1	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile13	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile14	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile16	Footing2	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile17	Footing2	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile18	Footing2	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile21	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile22	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile23	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile25	Footing2	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile26	Footing2	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile27	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	0.0000	3.0000
Pile28	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	0.0000	3.0000

Section Data

Code Block
50 PileCircle PileCircle

Section Data spreadsheet data is the same for all piles

...

FEA

Code Block

Pile2	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile3	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile4	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile7	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile8	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile9	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile11	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile12	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile13	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile14	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile16	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile17	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile18	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile21	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile22	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile23	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile25	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile26	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile27	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES
Pile28	[[36, 20, 20, 0, 0, 0, 0],[72, 20, 20, 0, 0, 0, 0],[108, 20, 20, 0, 0, 0, 0],[144, 20, 20, 0, 0, 0, 0],[180, 20, 20, 0, 0, 0, 0],[216, 20, 20, 0, 0, 0, 0],[252, 20, 20, 0, 0, 0, 0],[288, 20, 20, 0, 0, 0, 0],[324, 20, 20, 0, 0, 0, 0],[360, 20, 20, 0, 0, 0, 0],[396, 20, 20, 0, 0, 0, 0],[432, 20, 20, 0, 0, 0, 0],[468, 20, 20, 0, 0, 0, 0],[504, 20, 20, 0, 0, 0, 0],[540, 20, 20, 0, 0, 0, 0],[576, 20, 20, 100, 0, 0, 0]]	360.0000	Fixed	YES

Pile Properties

Code Block

3.0000	20.0000	20.0000	Free	Free	Free	Free
6.0000	20.0000	20.0000	Free	Free	Free	Free
9.0000	20.0000	20.0000	Free	Free	Free	Free
12.0000	20.0000	20.0000	Free	Free	Free	Free
15.0000	20.0000	20.0000	Free	Free	Free	Free
18.0000	20.0000	20.0000	Free	Free	Free	Free
21.0000	20.0000	20.0000	Free	Free	Free	Free
24.0000	20.0000	20.0000	Free	Free	Free	Free
27.0000	20.0000	20.0000	Free	Free	Free	Free
30.0000	20.0000	20.0000	Free	Free	Free	Free
33.0000	20.0000	20.0000	Free	Free	Free	Free
36.0000	20.0000	20.0000	Free	Free	Free	Free
39.0000	20.0000	20.0000	Free	Free	Free	Free
42.0000	20.0000	20.0000	Free	Free	Free	Free
45.0000	20.0000	20.0000	Free	Free	Free	Free
48.0000	20.0000	20.0000	100.0000	Free	Free	Free

...

Info
After clicking on 'Substructure> Pile' in the navigation treeview, follow the steps to define the Pile. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand

title	Single Pile

Single Pile [SIG]

1

🖱️ Click the three-dots icon on the Substructure cell, and then select Footing1.

Image AddedImage AddedImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Section and Pile Properites are set in the next step.

Image Added

3

Insert excerpt

	_Quick Tips
	_Quick Tips
name	Issue
nopanel	true

4

🖱️ Click three-dots icon on the Pile Length/Section cell and click Edit.

Image Added

5

🖱️Enter the Section Length as 50.

Image Added

6

🖱️ Click three-dots icon on Start Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image Added

7

Insert excerpt

	_Quick Tips
	_Quick Tips
name	ImportMaterial
nopanel	true

8

🖱️ Click three-dots icon on End Section cell and select the Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image Added

9

Insert excerpt

	_Quick Tips
	_Quick Tips
name	ImportSection
nopanel	true

10

🖱️Enter the Longitudinal Offset as 5.

Image Added

11

Insert excerpt

	_Quick Tips
	_Quick Tips
name	LongitudinalOffsetDefinition
nopanel	true

12

🖱️Enter the Transverse Offset as 10.

Image Added

13

Insert excerpt

	_Quick Tips
	_Quick Tips
name	TransverseOffsetDefinition
nopanel	true

14

🖱️Enter the Section Orientation as 30.

Image Added

15

🖱️ Keep the Batter Angle(Long.), Batter Angle(Trans.) and Embed. Length into Substructure as default.

Image Added

16

Image Added Enter the Pile Capacity as 720.

Image Added

17

Pile’s FEA propetries can be defined using FEA tab.

Image Added Keep Soil Spring Type as default.

Image Added

18

Image Added Click three-dots icon on Soil Springs (Linear) cell and select ‘Edit..’.

Image Added

19

🖱️Enter the Offset from the bottom of the Footing/Bent as 3.

🖱️ Keep the Tx,Ty,Tz, Rx, Ry and Rz as default.

Image Added

20

🖱️ To model all the pile property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet.

Image Added

21

🖱️ Keep the Top Connection and Generate FEM and parameters of FEA-Group Effect tab’s parameters as default.

22

🖱️ Set name as Pile2.

Image Added

23

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added

24

To model all the pile, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt

	_Quick Tips
	_Quick Tips
name	CopyPasteInputs
nopanel	true

Anchor

	PileProperty
	PileProperty

FEA Tab-Soil Springs (Linear)-Pile Property

Pile Property

Code Block

3.0000	Free	Free	Free	Free	Free	Free
6.0000	Free	Free	Free	Free	Free	Free
9.0000	Free	Free	Free	Free	Free	Free
12.0000	Free	Free	Free	Free	Free	Free
15.0000	Free	Free	Free	Free	Free	Free
18.0000	Free	Free	Free	Free	Free	Free
21.0000	Free	Free	Free	Free	Free	Free
24.0000	Free	Free	Free	Free	Free	Free
27.0000	Free	Free	Free	Free	Free	Free
30.0000	Free	Free	Free	Free	Free	Free
33.0000	Free	Free	Free	Free	Free	Free
36.0000	Free	Free	Free	Free	Free	Free
39.0000	Free	Free	Free	Free	Free	Free
42.0000	Free	Free	Free	Free	Free	Free
45.0000	Free	Free	Free	Free	Free	Free
48.0000	Free	Free	Free	Free	Free	Free
50.0000	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed

General Tab-Pile

Pile

Code Block

Pile2	Footing1	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile3	Footing1	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile4	Footing1	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile7	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile8	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile9	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile11	Footing1	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile12	Footing1	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile13	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile14	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile16	Footing2	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile17	Footing2	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile18	Footing2	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile21	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile22	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile23	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile25	Footing2	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile26	Footing2	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile27	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30.0000	0.0000	0.0000	3.0000	720.0000
Pile28	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30.0000	0.0000	0.0000	3.0000	720.0000

Anchor

	Photo
	Photo

Tip
The completed piles are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt

	_Quick Tips
	_Quick Tips
name	ModelButton
nopanel	true

...

Insert excerpt

	_Quick Tips
	_Quick Tips
name	FEAButton
nopanel	true

...

Tip
To view the entire procedure explained on this page, please watch the recorded Video below.

...

Version	Old Version 30	New Version Current
Changes made by	Umut Nuhat Sevinc	Melis Ceylan
Saved on	Sept 12, 2023	Jan 17, 2025

Versions Compared

Key

Section Data spreadsheet data is the same for all piles