...
| 1 | 🖱️ Click three-dots icon on Location cell and set a support line as Abut1. |
| ||||||||||
| 2 | 🖱️ Keep the Longitudinal Offset as default. |
| ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Enter the Transverse Offset as - 16.5. |
| ||||||||||
| 5 |
| |||||||||||
| 6 | 🖱️ Keep the insertion point name as default. | |||||||||||
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. | 
| ||||||||||
| 8 | To model all the insertion points, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |