...
| Panel |
|---|
| panelIconId | atlassian-info |
|---|
| panelIcon | :info: |
|---|
| bgColor | #DEEBFF |
|---|
|
Follow the next steps to define shear stud. |
...
Go to Shear Stud on the tree view
...
...
Set/Pick a Girder
...
Enter Start & End Stations where the shear studs will be placed.
...
...
Go to Shear Stud tab
...
...
Edit dimension and spacing/count data.
...
| Info |
|---|
After clicking on 'Superstructure> Connections> Shear Stud' in the navigation treeview, follow the steps to define the Shear Stud. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| 1 | 🖱️ Click the three-dots icon on the Girder cell, and then set G1. |  Image Added
|
| 2 | 🖱️Enter the Start Station as 1.975. |  Image Added
|
| 3 | 🖱️Enter the End Station as 73. |  Image Added
|
| 4 | Start and End Station parameters of the Shear Stud should take into account skew angle.
You can refer to the Quick Tip below to review the calculations. |
| 5 | | Insert excerpt |
|---|
| _Quick Tips |
|---|
| _Quick Tips |
|---|
| name | StationCalculateforSkewAngle |
|---|
| nopanel | true |
|---|
|
|
| 6 | You can edit the dimensions of Shear Stud from Shear Stud tab.
🖱️ Keep the Diameter, Shear Stud In-Place Height, Shear Stud Head Thickness, Number of Segments Used to Draw the Bolt and Show Studs as default. 🖱️Enter the No. of Studs per Row as 3.
🖱️Enter the Spacing of Studs in Row as 4.
🖱️Enter the Spacing between Rows as 6.
|  Image Added
|
| 7 | You can enable/disable display the detailing of shear studs by editing Show |
...
Studs as in splice spreadsheet. |
...
 Image Added |
...
...
...
Go to Shear Stud under Connections on the tree view.
...
Copy Position, and Shear Stud from model inputs and paste into OpenBrIM.
| Tip |
|---|
Completed deck bolted field splice is illustrated below. |
Image Removed 
Image Removed ...
| Expand |
|---|
|
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  Image Removed Image Removed |
are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  Image Added |
| 9 | To model all the shear studs, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. |
| Insert excerpt |
|---|
| _Quick Tips |
|---|
| _Quick Tips |
|---|
| name | CopyPasteInputs |
|---|
| nopanel | true |
|---|
|
...
...
...
...
...
...
...
...
...
...
...
G2 161.0000 265.0000
SS10 |
|
...
G2 266.0000 370.0000
SS11 |
|
...
G2 371.0000 457.0000
SS12 |
|
...
G2 458.0000 529.0000
SS13 |
|
...
...
...
...
G3 161.0000 265.0000
SS16 |
|
...
G3 266.0000 370.0000
SS17 |
|
...
G3 371.0000 457.0000
SS18 |
|
...
G3 458.0000 529.0000
SS19 |
|
...
...
...
...
G4 161.0000 265.0000
SS22 |
|
...
G4 266.0000 370.0000
SS23 |
|
...
G4 371.0000 457.0000
SS24 |
|
...
...
Shear Stud
...
| Tip |
|---|
The completed shear studs are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Insert excerpt |
|---|
| _Quick Tips |
|---|
| _Quick Tips |
|---|
| name | ModelButton |
|---|
| nopanel | true |
|---|
|
...
Image Added
Image Added
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
Shear Stud.mp4