Versions Compared

Version Old Version 15 New Version Current
Changes made by

mert.goktas (Unlicensed)

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Step 1: Adding Sections to the Project

1

Navigate to Properties > Sections

Image Modified

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Precast I Girder Sections >

FDOT I BEAMS > FIB36

Assign Material as: Fc_8_1/2ksi

Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT Image Removed4Image Removed5Image Removed6

AASHTO I BEAMS > AASHTO_TYPE_III_BEAM

Assign Material as: Fc_6ksi

OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89

Assign Material as: A709_50W

OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89

Assign Material as: A709_50W

OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 18X135

Assign Material as: A709_50W

OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHSS8X4X.375

Assign Material as: A500_B

Image Added
4

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Circle

Image Modified

Image Modified

7

5

Enter Radius as 18 in import section editor.

8
6

Click Import

9
7

Assign Material as Fc_4ksi

(If the material Fc_4ksi is already assigned by default, there is no need to assign it again)

10
8

Rename this section as Circle_exist_shaft_EB

11
9

Repeat the same steps from

6

4 to

10

8 for the other basic section.

  • Radius: 24

Rename this section as Circle_exist_shaft_Pier

Assign Material as Fc_4ksi

Image Modified

12
10

Repeat the same steps from

6

4 to

10

8 for the other basic section.

  • Radius: 18

Rename this section as Circle_exist_column

Assign Material as Fc_5_1/2ksi

Image Modified

13
11

Repeat the same steps from

6

4 to

10 14

Repeat the same steps from 6 to 10 for the other basic section.

8 for the other basic section.

  • Radius: 24

Rename this section as Circle_prop_column

Assign Material as Fc_5_1/2ksi

Image Removed

Enter Witdh and Depth

  • Width: 44

  • Depth: 40

Rename this section as Rectangle_exist_EBcap

Assign Material as Fc_5_1/2ksi

Image Modified

15
12

Repeat the same steps from

6 to 10 for the other basic section.

Enter Witdh and Depth

  • Width: 38

  • Depth: 40

Rename this section as Rectangle_prop_EB1cap

Assign Material as Fc_5_1/2ksi

Image Removed

16

Repeat the same steps from 6 to 10 for the other basic section.

Enter Witdh and Depth

  • Width: 40

  • Depth: 40

Rename this section as Rectangle_prop_EB4cap

Assign Material as Fc_5_1/2ksi

Image Removed

17Repeat the same steps from 6 to 10 Image Removed

18

Repeat the same steps from 6 to 10 for the other basic section.

Enter Witdh and Depth

Width:

4 to 8 for the other basic section.

Enter Witdh and Depth

  • Width:

54

  • Depth: 40

    • Rename this section as PierCap_prop

    Assign Material as Fc_5_1/2ksi

    • 48

    • Depth: 40

    Rename this section as PierCap_exist

    Assign Material as Fc_5_1/2ksi

    		Image Modified

    19
    13

    Select OpenBrIM Bridge Objects > Barrier Sections > General > SingleSlopeRight

    Enter Bottom & Top Witdh and Depth

    • Top Width: 10

    • Bottom Width: 18

    • Depth: 32

    Rename this section as Exist_Barrier_sw

    Assign Material as Fc_3_2ksi_NoStiffness

    		Image Modified

    Image Modified

    Image Modified

    Image Modified

    20

    14

    To access section editor click on the relevant cell in the "Name" column and select it from the combobox.

    21
    15

    Click on the blue circular box that appears after clicking the section shape, and Click Points Spreadsheet from the combobox.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-10.0000	32.0000
-12.5000	10.0000
-17.5000	3.0000
-17.5000	0.0000
0.7500	0.0000
0.7500	32.0000
0.0000	32.0000

    Paste copied data.

    22
    16

    Create a new section by defining its name as RigidSection

    Image Modified

    23

    17

    Copy and pastethe data below.

    Code Block
    languagexml
    RigidSec	RigidMat	18225.0000	18225.0000	18225.0000	31073.2290	27679218.7500	27679218.7500	0.0000	YES	NO	NO

    Refer to following page for more information about how to define Rigid Section

    Tip

    Completed Sections definitions are illustrated below.

    ...

    Insert excerpt
    _ConfluenceInclusions
    _ConfluenceInclusions
    nameTo access
    nopaneltrue

    ...

    Step 2: Adding Rebars and Strands to the Section

    ...

    Info

    Please follow the instructions provided below to set rebar and tendon detailing for AASHTO_TYPE_III_BEAM

    From any cell of the AASHTO_TYPE_III_BEAM row, click on three-dots icon to open Section Editor panel.

    		Image Modified

    Click + icon at the left top side of the screen.

    And Select Rebar

    Enter:

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Top

    • Dist. … Outer Surface of Rebar: 2

    • Outer Rebar Spacing: 4

    • Inner Rebar Spacing: 4

    • # of Rebars (per Row): 4

    • # of Rows: 1

    Click Add.

    		Image Modified

    Enter:

    • Profile: ASTMA615No8

    • Material: A615_60

    • Reference Edge: Bottom

    • Dist. … Outer Surface of Rebar: 2

    • Outer Rebar Spacing: 2

    • Inner Rebar Spacing: 2

    • # of Rebars (per Row): 8

    • # of Rows: 1

    Click Add.

    		Image Modified

    Click + icon at the left top side of the screen.

    And Select Tendon

    		Image Modified

    Enter:

    • Material: A416_270low_relaxation

    • Reference Edge: Bottom

    • Dist. …Ref Edge and CL Tendon: 4

    • Outer Tendon Spacing: 3

    • Inner Tendon Spacing: 4

    • Strand: Grade270_3_8_No9

    • Strand Count: 1

    • # of Tendon @ Row:

    1

    • 7

    Click Add.

    		Image Modified

    Image Modified

    Image Modified

    Image Modified

    Enter:

    • Material: A416_270low_relaxation

    • Reference Edge: Bottom

    • Dist. …Ref Edge and CL Tendon: 6

    • Outer Tendon Spacing: 2.5

    • Inner Tendon Spacing: 2.5

    • Strand: Grade270_3_8_No9

    • Strand Count: 1

    • # of Tendon @ Row: 6

    Click Add.

    Enter:

    • Material: A416_270low_relaxation

    • Reference Edge: Bottom

    • Dist. …Ref Edge and CL Tendon:

    6

    • 8

    • Outer Tendon Spacing:

    2.5

    • 3

    • Inner Tendon Spacing:

    2.5

    • 3

    • Strand: Grade270_3_8_No9

    • Strand Count: 1

    • # of Tendon @ Row:

    6

    • 3

    Click Add.

    ...

    Info

    Please follow the instructions provided below to set rebar detailing for Circle_exist_column

    From any cell of the Circle_exist_column row, click on three-dots icon to open Section Editor panel.

    		Image Modified

    Click + icon at the left top side of the screen.

    And Select Rebar

    Navigate to the "Circular Layout" tab

    Enter:

    • Profile: ASTMA615No11

    • Material: A615_60

    • Radius 1: 14

    • Radius 2: 14

    • # of Rebars (per Row): 20

    • # of Rows: 1

    Click Add.

    		Image Modified

    Image Modified

    ...

    Info

    Please follow the instructions provided below to set rebar detailing for Rectangle_exist_EBcap

    From any cell of the Rectangle_exist_EBcap row, click on three-dots icon to open Section Editor panel.

    		Image Modified

    Click + icon at the left top side of the screen.

    And Select Rebar

    Navigate to the "Draw Rebar Points" tab

    Enter:

    • # of Rebars (per Row): 4

    • # of Rows: 1

    Click Add.

    Manually top position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No9

    • Material: A615_60

    Click Apply.

    		Image Modified

    Image Modified

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	15.5000
-16.5000	0.0000
16.5000	0.0000
    		Image Modified

    Repeat the previous steps to define the Rebar into the Section

    Image Modified

    Select Rebar

    • # of Rebars (per Row): 2

    • # of Rows: 2

    Click Add.

    Manually middle position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No6

    • Material: A615_60

    Click Apply.

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-16.5000	0.0000
16.5000	0.0000
    		Image Modified

    Select Rebar

    Enter:

    • # of Rebars (per Row): 4

    • # of Rows: 1

    Click Add.

    Manually bottom position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No9

    • Material: A615_60

    Click Apply.

    		Image Modified

    Image Modified

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	-15.5000
-16.5000	0.0000
16.5000	0.0000
    		Image Modified

    ...

    Info

    Please follow the instructions provided below to set rebar detailing for PierCap_exist

    From any cell of the PierCap_exist row, click on three-dots icon to open Section Editor panel.

    		Image Modified

    Click + icon at the left top side of the screen.

    And Select Rebar

    Navigate to the "Draw Rebar Points" tab

    Enter:

    • # of Rebars (per Row): 9

    • # of Rows: 1

    Click Add.

    Manually top position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No11

    • Material: A615_60

    Click Apply.

    Image Modified

    Image Modified

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	15.5000
-17.5000	0.0000
17.5000	0.0000

    Navigate to the "Draw Rebar Points" tab

    Enter:

    • # of Rebars (per Row): 5

    • # of Rows: 1

    Click Add.

    Manually bottom position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No11

    • Material: A615_60

    Click Apply.

    Image Modified

    Image Modified

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	-15.5000
-17.5000	0.0000
17.5000	0.0000

    Select Rebar

    • # of Rebars (per Row): 5

    • # of Rows: 2

    Click Add.

    Manually middle position the rebar line within the section. And set data as follows:

    • Profile: ASTMA615No6

    • Material: A615_60

    Click Apply.

    		Image Modified

    Image Modified

    Click … icon shown on created rebar.

    Click Points Spreadsheet.

    Copy the data below.

    Code Block
    languagexml
    0.0000	0.0000
-21.0000	0.0000
21.0000	0.0000

    ...