Versions Compared

Version Old Version 15 New Version Current
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleSteel I Girder Code Check (AASHTO)
Steel I Girder Code Check (AASHTO) [SIG]
1

(blue star) 🖱️ Click the three-dots icon on the Girder cell, and then set G4 G1.

Image Removed

image-20250121-082431.pngImage Addedimage-20250121-082440.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template is define in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

(blue star)🖱️Enter the Station as 260.

Image Removed

image-20250121-082455.pngImage Added

5

(blue star) 🖱️ Click the three-dots icon on the Code Check Template cell, and then set SuperstrCCT.

Image Removed

image-20250121-082511.pngImage Addedimage-20250121-082521.pngImage Added

6

(blue star) 🖱️ Keep the Panel Type and Modelar Ratio Comp. Method as default.

Image Removed

image-20250121-082534.pngImage Added

7

(blue star)🖱️Enter the Modular Ratio as 7.5639.

Image Removed

image-20250121-082553.pngImage Added

8

You can edit the Deck Reinforcement parameters of Steel I Girder Code Check from Deck Reinforcement tab.

(blue star) 🖱️ Click the three-dots icon on the Input Data Preference cell, and then set Override Deck Rebar.

(blue star)🖱️Enter the Lumped Top Reinforcement Area within the Effective Width as 7.893.

(blue star)🖱️Enter the Distance from the CL of top bars to deck top Top Bars to the Top of the Deck as 3.

(blue star)🖱️Enter the Lumped Bottom Reinforcement Area within the Effective Width as 3.947.

(blue star)🖱️Enter the Distance from the CL of bottom bars to deck bottom Bottom Bars to the Bottom of the Deck as 3.

(blue star) 🖱️ Click the three-dots icon on the Deck Rebar Material cell, and then set A615_60.

(blue star)🖱️Enter the Concrete creep adjustment factor as 3.

Image Removed

image-20250121-082608.pngImage Addedimage-20250121-082618.pngImage Addedimage-20250121-082711.pngImage Added

9

(blue star) 🖱️ Set name as G4Span G1Span.

Image Removed

image-20250121-082727.pngImage Added

10

To model all the steel i girder code check, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Steel I Girder Code Check (AASHTO)

General

Code Block
G4SpanG1Span	G4G1	260.0000	SuperstrCCT	Interior Panel	User Input	7.5639
G2SupportG3Support	G2G3	160.0000	SuperstrCCT	End Panel	User Input	7.5639

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...