| Info |
|---|
Follow the next steps to define transverse stiffener. |
...
Go to Transverse Stiffener.
...
...
Enter the Station, Side of Web and Material.
...
Go to Dimensions tab to edit the stiffener inputs.
...
...
Go to 3D Detailing tab to edit the stiffener 3D Detailing inputs.
...
...
Go to FEM tab to enable/disable Stiffener FEM.
...
...
| Expand | ||
|---|---|---|
| ||
Do not forget to assign the related material for each case. |
Follow the below steps to copy and paste all inputs from our data set.
...
Go to Transverse Stiffener under Connections on the tree view.
...
| Tip |
|---|
Completed transverse stiffener is illustrated below. |
...
| Info |
|---|
After clicking on 'Superstructure> Stiffeners> Transverse Stiffener' in the navigation treeview, follow the steps to define the Transverse Stiffener. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Transverse Stiffener [SIG] |
| 1 | 🖱️ Click the three-dots icon on the Girder cell, and then set G1. |
| ||||||||||
| 2 | 🖱️Enter the Station as 130.2414. |
| ||||||||||
| 3 | 🖱️ Keep Skew Angle and Side of Web as default. | |||||||||||
| 4 | 🖱️ Click three-dots icon on Material cells and select a Material as A709 50W. |
| ||||||||||
| 5 |
| |||||||||||
| 6 | 🖱️ Keep the Dimension, 3D Detailing and FEM as default. |
| ||||||||||
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||||||||||
| 8 | To model all the Transverse Stiffener, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Transverse Stiffener | ||
|---|---|---|
General
|
|
|
| Anchor |
|---|
...
|
| Code Block |
|---|
STFT1 1.0000 12.0000 0.0000 0.0000
STFT3 1.0000 12.0000 0.0000 0.0000 |
...
3D Detailing
| Code Block |
|---|
STFT1 3.5000 2.5000
STFT3 3.5000 2.5000 |
FEM
| Code Block |
|---|
STFT1 NO
STFT3 NO |
...
| Tip |
|---|
The completed transverse stiffeners are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |