Versions Compared

Version Old Version 13 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

After clicking on 'Properties> Bolt Property' in the navigation treeview, follow the steps to define the Bolt Property. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleBolt Property
Bolt Property [SIG]
1

🖱️ Click first cell on Name cell and set name as BoltFla.

Image Removed

image-20250113-160904.pngImage Added

2

🖱️ Click three-dots icon on Bolt Diameter cell and set a diameter as 0.875.

Image Removed

image-20250113-160921.pngImage Added

3

🖱️ Keep the Diameter of the Head as default.

4

🖱️ Enter the Diameter of the HutNut as 1.

Image Removed

image-20250113-160939.pngImage Added

5

🖱️ Keep the Thickness of the Head and Thickness of the Nut as default.

6

🖱️ Keep the Mechanical Properties and Visual Settings as default.

Image RemovedImage Removed

image-20250113-160958.pngImage Addedimage-20250113-161009.pngImage Added

7

To model all the bolt property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Bolt Property

Geometric Properties

Code Block
BoltFla	0.875	1.4375	1.0000	0.4688	0.7344
BoltWeb	0.875	1.4375	1.4375	0.4688	0.7344
BoltGusset	1.0000	1.4375	1.4375	0.4688	0.7344

Mechanical Properties

Code Block
BoltFla	A325	YES	Standard Hole	DrilledFullSize	Excluded	ClassB
BoltWeb	A325	YES	Standard Hole	DrilledFullSize	Included	ClassB
BoltGusset	A325	YES	Standard Hole	DrilledFullSize	Excluded	ClassB

Anchor
Photo
Photo

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...

bolt properties.mp4