...
| title | Quick Tip |
|---|
| Info |
|---|
Follow the below steps to set the alignment of the bridge. |
...
Go to Bridge Geometry > Bridge Alignment
...
...
Set Alignment.
...
...
Set name as BRG1.
After clicking on 'Bridge Geometry> Bridge Alignment' in the navigation treeview, follow the steps to define the Bridge Alignment You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Bridge Alignment [SIG] |
| 1 | 🖱️ Click the three-dots icon on the Alignment cell, and then set ALIGNMENT1. |  |
| 2 | 🖱️ Keep the bridge alignment name as default. |  |
| 3 | You can enter additional bridge info through the Bridge Info tab if needed. |
🖱️ For this example, the parameters should be kept as defaults. |  |
| Tip |
|---|
The completed bridge alignment is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |