...
Figure 1 illustrates the default material definitions for slab, column and slab rebar that serve as prerequisites for slab and beam analysis.
Copy From
→ To copy drawings, properties, etc. and more from another story, click on the "Copy From" button (Figure 1).
→ Select the objects you want to copy and select choose a source story (Figure 2).
“Select Graphically” The "Select Graphically" button overlays the selected objects for , allowing users to manually select individual objects manually from the drawing space. “Copy All” The "Copy All" button copies all of the objects that have been selected in the checkbox.
...
...
Overlay
→ Click the “Overlay” button (Figure 1) to To bring the uploaded reference drawings as background that are uploaded in Drawing Filesand assigned to a story in the Stories sections as background, click on the "Overlay" button (Figure 1).
...
Select the objects to show and/or select and the corresponding reference drawings assigned to the stories, then click the “OK” "OK" button (Figure 3) to overlay drawings.→ Click the “Overlay” button again to unselect objects or drawings when they are no in use.
Figure 3
Update Similar Stories
→ Click on the “Update "Update Similar Stories”Stories" button (Figure 14) to copy duplicate the objects of the current story to other stories.
...
→ Select the stories to paste in the checkbox (Figure 4).
If the existing objects on the target floor are to be updated, click “Replace”. If the objects are to be added to existing objects, click “ADD to Existing”.
Similar stories will automatically be selected in the checkbox.
...
The user has the option to either override the objects to be pasted with the existing ones or keep the existing ones at the same location (Figure 5).
→ Click on the "Check Floor Points" button (Figure 1) to makes align the edges of the objects overlap. This is because it increases helps improve the mesh quality created generated during the analysis.