Content Comparison

🖱️ Click three-dots icon on Stage cell and select a Construction Stage as WSStage.

🖱️ Keep the Span Height Variation as default.

Image Removed

Image Added

🖱️ Click three-dots icon on Structural Objects and Pressure Parameters cell and Edit.

Image Removed

Image Added

🖱️ Click three-dots on the cell of the Applied Elements and pick the element BR2BR1.

Image Removed

Image Removed

Image AddedImage Added

🖱️ Click the three-dots icon on the Wind Direction cell, and then set Left to Right.

Image Added

Image Added

🖱️Enter the Structural Height from Ground Line as 52.

Image Added

🖱️ Keep the Gust Effect Factor parameters as default.

The gust effect factor value is specified in AASHTO Table 3.8.1.2.1-1. To determine these values, you can refer to the quick tip below.

Image Added

🖱️ Keep the Drag Coefficient as default.

The drag coefficient value is specified in AASHTO Table 3.8.1.2.1-2. To determine this value, you can refer to the quick tip below.

Image Added

🖱️ Please enter the following values sequentially:
2^nd row - Applied Elements: BR2 Wind Direction: Right to Left Structural Height from Line: 52 Gust Effect Factors: 1 Drag Coefficient: 1.3
3^rd row - Applied Elements: G4 Wind Direction: Left to Right Structural Height from Line: 49 Gust Effect Factors: 1 Drag Coefficient: 1.3
4^th row - Applied Elements: G1 Wind Direction: Right to Left Structural Height from Line: 49 Gust Effect Factors: 1 Drag Coefficient: 1.3
5^th row - Applied Elements: PierCap1 Wind Direction: Both Direction Structural Height from Line: 41 Gust Effect Factors: 1 Drag Coefficient: 1.6
6^th row - Applied Elements: PierCap2 Wind Direction: Both Direction Structural Height from Line: 41 Gust Effect Factors: 1 Drag Coefficient: 1.6
7^th row - Applied Elements: PierColumn4 Wind Direction: Left to Right Structural Height from Line: 33 Gust Effect Factors: 1 Drag Coefficient: 2
8^th row - Applied Elements: PierColumn1 Wind Direction: Right to Left Structural Height from Line: 33 Gust Effect Factors: 1 Drag Coefficient: 2
9^th row - Applied Elements: PierColumn5 Wind Direction: Both Direction Structural Height from Line: 33 Gust Effect Factors: 1 Drag Coefficient: 2

Image Added

🖱️ Keep the Substructure Objects and Pressure Parameters and Superstructure Objects and Pressure Parameters as default.

Image Added

🖱️ Keep the Strength III Design Wind Speed as default.

The strength III design wind speed value is specified in AASHTO Figure 3.8.1.1.2-1. To determine this value, you can refer to the quick tip below.

Image Added

🖱️ Keep the Surface Roughness as default.

The surface roughness value is specified in AASHTO 3.8.1.1.4 . To determine this value, you can refer to the quick tip below.

Image Added

Image Added Keep the Analysis Option as default.

Image Added

🖱️ Keep the Generate Wind Load Report as default.

Image Added

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the FEA view of OpenBrIM.

You can refer to the Quick Tip below to learn how the loading displayed in the screenshot is viewed.