Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

After each construction stage, the finite element analysis produces results that can be utilized to ensure structural compliance with codes. To create the stages correctly, users must understand the underlying logic. At the start of the stage construction analysis, all structural elements are in an unconstructed state.

Info

Please follow the instructions provided below to construction stages.

1

Navigate to Loading > Construction Stage

Image AddedImage AddedImage AddedImage Added
2

Begin by defining a construction stage and then enter the preceding stage for that construction stage.

3

Ensure that the "Prior Stage" cell is “Null” as the first stage of the construction process does not have a preceding stage.

4

To assign the data in the "Construction Method" and "Filter by load type cells" click on the three dot-icon and select the appropriate option from the combobox.

5

Enter the data as follows for 1st Stage:

Name: BridgeConst

Prior Stage: NULL

Construction Method: None

Load Type: Dead

Active: Yes

6

Please repeat steps 2 through 5 to define all of the construction stages in the project.

Image Added

7
Expand
titleQuick Tip

In Staged Construction Analysis, when joints are activated they normally enter at the location that was initially given to them. Joints sometimes need to become active in a location relative to the deformed structure of the model, rather than in an exact position known ahead of time.

The construction method option of construction stages specifies how to place a joint relative to the deformed location of other joints.

In Precast I Girder Bridges, deck formwork deforms and follows girder displacements. Therefore deck nodes should be constructed by shifting the node down to match the translational displacement of the girders nodes. This can be achieved with the Construction Method = Equal option of construction stages.

Image Added

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameTo access
nopaneltrue

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameCopyPaste
nopaneltrue

1

Navigate to Construction Stage under Loading on the tree view.

2

Copy Stage, Time Dependent and AASHTO N-3N from model inputs and paste into OpenBrIM.

...

Anchor
ModelInputs
ModelInputs

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue

Construction Stage

Stage

Time Dependent

AASHTO N-3N

Code Block
languagexml
BridgeConst	NULL	None	Dead	Yes
GirderErection	BridgeConst	None	Dead	Yes
SIPFormConst	GirderErection	None	Dead	Yes
DeckConstPour	SIPFormConst	None	Dead	Yes
DeckConstHard	DeckConstPour	Equal	Change	Yes
BarrierConst	DeckConstHard	None	Imposed Dead	Yes
FutureWearingStage	BarrierConst	None	Wearing Surface	Yes
LiveLoadStage	FutureWearingStage	None	Live (Vehicular + Impact)	Yes
WindonStructureStage	FutureWearingStage	None	Wind on Structure	Yes
TUExpStage	FutureWearingStage	None	Temperature	Yes
TUContStage	FutureWearingStage	None	Temperature	Yes
BrakingStage	FutureWearingStage	None	Braking	Yes
CentrifugalStage	FutureWearingStage	None	Centrifugal	Yes
WindonLLStage	FutureWearingStage	None	Wind on Live	Yes
CollisionStage	FutureWearingStage	None	Vehicular Collision	Yes
Code Block
languagexml
BridgeConst	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
GirderErection	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
SIPFormConst	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
DeckConstPour	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
DeckConstHard	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
BarrierConst	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
FutureWearingStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
LiveLoadStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
WindonStructureStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
TUExpStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
TUContStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
BrakingStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
CentrifugalStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
WindonLLStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
CollisionStage	0.0000	NA	72.0000	80.0000	Include	Include	Include	Include	Include
Code Block
languagexml
BridgeConst	NULL	NA
GirderErection	NULL	NA
SIPFormConst	NULL	NA
DeckConstPour	NULL	NA
DeckConstHard	NULL	NA
BarrierConst	NULL	NA
FutureWearingStage	NULL	NA
LiveLoadStage	NULL	NA
WindonStructureStage	NULL	NA
TUExpStage	NULL	NA
TUContStage	NULL	NA
BrakingStage	NULL	NA
CentrifugalStage	NULL	NA
WindonLLStage	NULL	NA
CollisionStage	NULL	NA