Content Comparison

In this section, please specify Pier Footing the code check will be applied to.

Navigate to Substructure Code Checks > Pier Footing Code Check

Image Added

Click three-dots icon on Select Pier Footing and select as RF1

(As a different way, the relevant Pier Footing can be selected on the 3D view by clicking "Pick".

Click three-dots icon on Pier Footing Template.

Select the PFCCT1 "Pier Footing Code Check" template defined in the previous steps for all.

Enter code check station in longitudinal and transverse directions by Distance in Longitudinal direction from centroid [ft] and Distance in Longitudinal direction from centroid [ft] as 3.

Navigate Flexural Reinforcements tab.

Set Reinforcement Material as A615_60.

Click three-dots icon on Longitudinal Direction Reinforcements and clik Edit.

There are 2 types of Flexural Reinforcement in the section, Bottom and Top.

Enter Parameters in combobox as follows for both:

Rebar Profile as ASTMA615No6

Spacing of Reinforcements [in] as 10

Distance to Extreme Fiber (concrete cover) [in] as 4

Repeat previous step (row 11) for Transverse Direction Reinforcements.

Navigate Shear Reinforcements tab.

Set Reinforcement Profile as ASTMA615No6 for Longitudinal and Transverse direction

Navigate to Pier Footing Code Check under Superstructure Code Checks on the tree view.

Copy Inputs, Flexural Reinforcements, and Shear Reinforcements from model inputs and paste into OpenBrIM.

Inputs

Flexural Reinforcements

Shear Reinforcements