| Info |
|---|
Please follow the instructions provided below to perform Circular Column Design. |
Table 1: Circular Column Design
| 1 | Navigate to the C17 (C18-C19) Circular column under the Column Design Line from the tree view. Once there, click "Column Design Line Data" and select "Axial Force Moment Design". Enter the data as shown on the figure. For example: Rebar: #7, Rebar Count: 10 Please note that the "Reinforcement Ratio %" values will change as a result of the entered values. |  | |||||
| 2 |
| ||||||
| 3 | Due to the entered values, Column C17 must be verified again. Please press the "Verify select" button and select C17 column on the CAD side. If the Design State cell shows "Passed" for all stories, the design process is complete. |  | |||||
| 4 | Additionally, by clicking on the "Show" button for the Detailed Report, a code check report will be opened for column C28. | ||||||
| 5 |
| ||||||
| Tip |
|---|
The “Circular Column Design” part is completed in this step. You can proceed to the “Beam Design” section. |