Versions Compared

Version Old Version 1 New Version Current
Changes made by

Zeynep Bayam

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

After clicking on 'Superstructure> Connections> Shear Stud' in the navigation treeview, follow the steps to define the Shear Stud. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleShear Stud
Shear Stud [SIG]
1

🖱️ Click the three-dots icon on the Girder cell, and then set G1.

image-20250117-111856.pngImage Added

2

🖱️Enter the Start Station as 1.975.

image-20250117-111959.pngImage Added

3

🖱️Enter the End Station as 73.

image-20250117-112015.pngImage Added

4

Start and End Station parameters of the Shear Stud should take into account skew angle.
You can refer to the Quick Tip below to review the calculations.

5

Insert excerpt
_Quick Tips
_Quick Tips
nameStationCalculateforSkewAngle
nopaneltrue

6

You can edit the dimensions of Shear Stud from Shear Stud tab.
🖱️ Keep the Diameter, Shear Stud In-Place Height, Shear Stud Head Thickness, Number of Segments Used to Draw the Bolt and Show Studs as default.

🖱️Enter the No. of Studs per Row as 3.
🖱️Enter the Spacing of Studs in Row as 4.
🖱️Enter the Spacing between Rows as 6.

image-20250117-112048.pngImage Added

7

 You can enable/disable display the detailing of shear studs by editing Show Studs as in splice spreadsheet.

Image Added
8

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added
9

To model all the shear studs, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Shear Stud

Position

Code Block
SS1	G1	1.9750	73.0000
SS2	G1	74.5917	160.0000
SS3	G1	161.0000	265.0000
SS4	G1	266.0000	370.0000
SS5	G1	371.0000	457.0000
SS6	G1	458.0000	529.0000
SS7	G2	1.9750	73.0000
SS8	G2	74.5917	160.0000
SS9	G2	161.0000	265.0000
SS10	G2	266.0000	370.0000
SS11	G2	371.0000	457.0000
SS12	G2	458.0000	529.0000
SS13	G3	1.9750	73.0000
SS14	G3	74.5917	160.0000
SS15	G3	161.0000	265.0000
SS16	G3	266.0000	370.0000
SS17	G3	371.0000	457.0000
SS18	G3	458.0000	529.0000
SS19	G4	1.9750	73.0000
SS20	G4	74.5917	160.0000
SS21	G4	161.0000	265.0000
SS22	G4	266.0000	370.0000
SS23	G4	371.0000	457.0000
SS24	G4	458.0000	529.0000

Anchor
Photo
Photo

Tip

The completed shear studs are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

image-20250117-111718.pngImage Addedimage-20250117-111803.pngImage Added

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

Shear Stud.mp4