Mat foundation is defined and drawn from this section.
...
Figure 1
→ Click Mat Edge button as shown in the “Mat Edge” button (Figure 1) to draw the mat foundation as illustrated in (Figure 2).
...
Figure 2
→ Enter the properties of the mat edge, such as offset, thickness, soil capacity, or soil subgrade modulus.
...
To divide mat edge into pieces which have with different properties;
→ Click Mat Piece button as shown in the “Mat Piece” button (Figure 1) and draw the piece area as demonstrated in (Figure 4).
...
Figure 4
→ Enter the properties of the mat piece, such as offset, thickness, soil capacity, or soil subgrade modulus.
...