Modelling and drawings of the building are made under this main section.
...
Figure 1
| Show if | ||
|---|---|---|
| ||
Figure 1' de görülen Add butonuna tıkladıktan sonra Figure 2’de görülen ekranda oluşturulmak istenen kat sayısı girilir. |
Click “Add” → Click Add button as shown in Figure 1 to add stories and enter the number of stories as shown in Figure 2.
...
Figure 2
...
Figure 3
Parameters of the stories such as elevation can be edited after the stories are created.
Reference drawings that are uploaded in “Drawing Files” section can be assigned to stories as demonstrated in Figure 3.
Changes in a story which is assigned as “similar story” will affect other stories which uses data of that ”similar story” as shown in Figure 3.
...
| userGroups | Turkish |
|---|
Kat sayısı girildikten sonra gelen ekranda katlara ait property’ler güncellenebilir.
Drawing Files sekmesinde eklenen dosya çizimleri katlara assign edilmek isteniyorsa Drawing File sütunundan upload edilen dosya hangi kat için isteniyorsa seçilir.
...
→ Enter the elevation of each story
→ Select the default material of slab, column and rebar ar each story (optional).
If default material parameters are set before the modelling of the story, default material property will automatically assigned to the drawn slab, column and rebar.
→ Select the drawing file of the story (optional)
Uploaded drawing files must be set as drawing file to a story to be able to overlay the reference drawing.
→ Set similar story (optional)
CSI SAFE results of the story which is set as similar story to another story, will be used for the similar stories.