Mat foundation is defined and drawn from this section.
...
Figure 1
→ Click Mat Edge button as shown in Figure 1 to draw mat foundation mat as illustrated in Figure 2.
...
Figure 2
→ Enter the properties of the mat edge such as offset, thickness, soil capacity or soil subgrade modulus.
→ Select the concrete and rebar material.
...
To divide mat edge into pieces which have different properties click ;
→ Click Mat Piece button as shown in Figure 1 and draw piece area as demonstrated in Figure 4
...
Figure 4
→ Enter the properties of the mat piece such as offset, thickness, soil capacity or soil subgrade modulus.
→ Select the concrete and rebar material.
...