...
Figure 1
Pile cap can be assigned as pile cap template or as custom pile cap. Before the assignment, pile cap template must be imported or custom pile cap must be created. Importing template or creating custom pile cap is described in Templates and Custom sections under this main section.
Click “Assign Pile Cap Template” button as shown in Figure 1 and select column/columns then press “enter” to assign previously imported pile cap template.
Click “ Assign Custom Pile Cap” button as shown in Figure 1 and select column/columns then press “enter” to assign previously created custom pile cap.
| Show if | ||
|---|---|---|
| ||
Stories içinde zemin katta kolon yaratıldıktan ve Pile Cap’in alt başlığında bulunan Template, import edildikten ya da custom pile cap oluşturulduktan sonra Figure 1de bulunan Assign Pile Cap Template butonuna basılarak stories içinde çizilen kolonlardan istenilen kolon seçilir ve “enter“ tuşuna basılır. Birden fazla kolonu içine alan dikdörtgen çizildikten sonra “enter” tuşuna basıldığında çoklu assign edilebilir. |
Figure 2
Pile template and other parameters can be edited later as demonstrated in Figure 2.
...
| userGroups | Turkish |
|---|
Pile cap tanımlanan kolonda Figure 2’de görüldüğü gibi pile template sütunundan import edilmiş template’ler arasında değişim yapılabilir.
...
Click Assign Pile Cap Template button and select columns or shear walls to assign pile templates as illustrated in Figure 2.
...
Figure 2
Select previously imported pile templates of selected columns or shear walls as shown in Figure 3.
How to import a pile template is explained in Templates page.
...
Figure 3
Enter the soil embedment distance of pile in spreadsheet.
Custom pile caps are automatically assigned to the columns or shear walls where the pile cap is drawn.Thus pile template of the custom pile cap can not be changed in the spreadsheet shown in Figure 3.
Custom pile cap properties can be edited as explained in Custom page.
Enter the soil embedment distance of the custom pile cap.